Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Doplňující informace

ASTM D5501-09

Standard Test Method for Determination of Ethanol Content of Denatured Fuel Ethanol by Gas Chromatography

Automaticky přeložený název:

Standardní zkušební metoda pro stanovení Obsah ethanolu denaturovaného ethanolu palivové plynovou chromatografií

NORMA vydána dne 15.4.2009

Jazyk
Provedení	Online zabezpečené PDF - 1 783.70 Kč Tištěné - 1 783.70 Kč
Dostupnost	SKLADEM
Cena	1783.70 Kč bez DPH
1 783.70 Kč

Informace o normě:

Označení normy: ASTM D5501-09
Poznámka: NEPLATNÁ
Datum vydání normy: 15.4.2009
Kód zboží: NS-31470
Počet stran: 5
Přibližná hmotnost: 15 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Anotace textu normy ASTM D5501-09 :

Keywords:

denatured, ethanol, fuel grade gas chromatography, Denatured fuel ethanol, Ethanol, Fuel grade ethanol, Gas chromatography (GC)--petroleum products, ICS Number Code 75.160.20 (Liquid fuels)

Doplňující informace

Significance and Use

Fuel ethanol is required to be denatured with gasoline in accordance with Specification D 4806. State and federal laws specify the concentration of ethanol in gasoline blends. The determination of the amount of denaturant is important to ensure the blended fuel complies with federal and state laws. This test method provides a method of determining the percentage of ethanol (purity) of the fuel ethanol that is blended into gasoline.

1. Scope

1.1 This test method covers the determination of the ethanol content of denatured fuel ethanol by gas chromatography.

1.2 Ethanol is determined from 93 to 97 mass % and methanol is determined from 0.01 to 0.6 mass %. Equations used to convert these individual alcohols from mass % to volume % are provided.

1.3 This test method does identify and quantify methanol but does not purport to identify all individual components that make up the denaturant.

1.4 Water cannot be determined by this test method and shall be measured by a procedure such as Test Method D 1364 and the result used to correct the chromatographic values.

1.5 This test method is inappropriate for impurities that boil at temperatures higher than 225°C or for impurities that cause poor or no response in a flame ionization detector, such as water.

1.6 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

E594-96(2026)	Standard Practice for Testing Flame Ionization Detectors Used in Gas or Supercritical Fluid Chromatography
D4626-23	Standard Practice for Calculation of Gas Chromatographic Response Factors
D4307-17(2021)	Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards
D4175-24e2	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants (Includes all amendments and changes 6/9/2026).
D4057-22	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
D4052-22	Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
D1364-22	Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)
D1298-24	Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
D5798-25	Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
D5599-22	Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
D4815-22	Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography
E203-24	Standard Test Method for Water Using Volumetric Karl Fischer Titration
D6792-25	Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
D6299-26a	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance (Includes all amendments and changes 8/4/2026).
E1510-95(2021)	Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs
E1064-24	Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
D4806-25	Standard Specification for Denatured Fuel Ethanol
E355-96(2021)e1	Standard Practice for Gas Chromatography Terms and Relationships (Includes all amendments and changes 4/28/2021).

Odebírejte informace o nově vydaných normách ZDARMA:

Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.