Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM D5328-92(1997)
Standard Test Method for Volatile Organic Compound (VOC40) Content of Non-Heatset Paste Printing Ink Systems at 40 °;C (Withdrawn 2001)
Automaticky přeložený název:
Standardní zkušební metoda pro těkavých organických sloučenin ( VOC40 ) Obsah Non- Heatset pasta Printing Ink Systems při 40 ° C ( Uzavřený 2001 )
NORMA vydána dne 1.1.1992
Informace o normě:
Označení normy: ASTM D5328-92(1997)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.1.1992
Kód zboží: NS-30750
Počet stran: 1
Přibližná hmotnost: 3 g (0.01 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Anotace textu normy ASTM D5328-92(1997) :
Keywords:
Nonheatset paste printing inks, Nonvolatile matter content-paints/related coatings/materials, Printing inks, Volatile matter content-paints/related coatings/materials, Volatile organic compounds (VOC)-paints/related coatings/materials, non-heatset paste printing ink systems-volatile organic compound (VOC40), content at 40°C, test, ICS Number Code 87.080 (Inks. Printing inks)
Doplňující informace
| 1. Scope |
|
1.1 This test method covers the determination of the volatile organic compound (VOC40) content of non-heatset printing ink systems of the paste type using a baking cycle of 1 h at 40°C. 1.2 This test method is applicable to paste printing inks and vehicles that dry primarily by absorption, polymerization, or related means without the application of heat. Such systems do not contain appreciable quantities of low-boiling solvents that evaporate readily at ordinary room temperatures. Note 1-The 40°C baking temperature in this test method is the same as that specified in Bay Area Method 30. The temperature of heating is 110°C in several related test methods, for example, D2369, D4713 and EPA Reference Method 24. VOC determinations are reviewed in ASTM Manual Series MNL 4.1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
Doporučujeme:
