Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions
Automaticky přeložený název:
Standardní praxe pro hodnocení a porovnávání přenesením Efektivita nástřikem nátěry pod vedením generála laboratorních podmínkách
NORMA vydána dne 1.6.2013
Označení normy: ASTM D5327-97(2013)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.6.2013
Kód zboží: NS-30748
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
general laboratory method, laboratory practice, spray-applied coatings, transfer efficiency, ICS Number Code 29.020 (Electrical engineering in general)
Significance and Use | ||||||||||||
5.1 Subject to the limitations listed in 1.1 This practice covers the evaluation and comparison of the transfer efficiency of spray-applied coatings under general laboratory conditions. Transfer efficiency is the ratio of paint solids deposited to the total paint solids used during the application process, expressed as a percent. This practice can be used to study the effect on transfer efficiency of changing operating variables and paint formulations. Key variables that need to be controlled are listed in 1.2 The reproducibility of this practice is highly dependent on the degree of control of the parameters listed in Section 8 of the practice. 1.3 Limitations—This laboratory practice indicates only the direction of the effect of operating variables and liquid paint formulations on transfer efficiency under conditions of the laboratory test: the magnitude of the effect can be determined only with specific plant experience. In fact, the nature of the critical parameters that affect transfer efficiency makes clear that it is not possible to extrapolate laboratory results. 1.4 The values stated in SI units
are to be regarded as the standard. The values given in parentheses
are for information only.
1.5 This standard does not
purport to address all of the safety concerns, if any, associated
with its use. It is the responsibility of the user of this standard
to establish appropriate safety and health practices and determine
the applicability of regulatory limitations prior to use.
Standard Practice for Sampling Liquid
Paints and Related Pigmented Coatings Standard Test Method for Volatile Content
of Coatings NFPA 86 Standard for Ovens and Furnaces NFPA 33 Spray Application Using Flammable and
Combustible Materials Available from National Fire Protection
Association (NFPA), 1 Batterymarch Park, Quincy, MA 02169-7471,
http://www.nfpa.org. Standard Test Method for Viscosity by
Ford Viscosity Cup Standard Test Method for Evaluating and
Comparing Transfer Efficiency of Spray Applied Coatings Under
Laboratory Conditions |
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 28.04.2024 (Počet položek: 2 896 137)
© Copyright 2024 NORMSERVIS s.r.o.