Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Doplňující informace

ASTM D5222-08

Standard Specification for High Fire-Point Mineral Electrical Insulating Oils

Automaticky přeložený název:

Standard Specification pro High Fire-Point Mineral Elektroizolační oleje

NORMA vydána dne 1.1.2008

Jazyk
Provedení	PDF - okamžité stažení - 1 536.70 Kč Tištěné - 1 536.70 Kč
Dostupnost	SKLADEM
Cena	1 536.70 Kč bez DPH
1 536.70 Kč

Informace o normě:

Označení normy: ASTM D5222-08
Poznámka: NEPLATNÁ
Datum vydání normy: 1.1.2008
Kód zboží: NS-30332
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Izolační oleje

Anotace textu normy ASTM D5222-08 :

Keywords:
electrical insulating oil, fire point, flammability, insulating fluid, mineral insulating oil, Cooling media, Dielectric fluids, Electrical insulating oils--specifications, Fire-point, Flammability, High fire-point electrical insulating oils, Insulating fluids--specifications, Mineral insulating oil--specifications, Power/distribution electrical systems, Switchgears, Transformers--specifications, ICS Number Code 29.040.10 (Insulating oils)

Doplňující informace

1. Scope

1.1 This specification describes a high fire-point mineral oil based insulating fluid, for use as a dielectric and cooling medium in new and existing power and distribution electrical apparatus, such as transformers and switchgear.

1.2 High fire-point insulating oil differs from conventional mineral insulating oil by possessing a fire-point of at least 300°C. High fire-point mineral insulating oils are also referred to as “less flammable” mineral insulating oils.This property is necessary in order to comply with certain application requirements of the National Electrical Code (Article 450-23) or other agencies. The material discussed in this specification is miscible with other petroleum based insulating oils. Mixing high fire-point liquids with lower fire point hydrocarbon insulating oils (for example, Specification D 3487 mineral oil) may result in fire points of less than 300°C.

1.3 This specification is intended to define a high fire-point electrical mineral insulating oil that is compatible with typical material of construction of existing apparatus and will satisfactorily maintain its functional characteristic in its application in this application. The material described in this specification may not be miscible with electrical insulating liquids of non-petroleum origin. The user should contact the manufacturer of the high fire-point insulating oil for guidance in this respect.

1.4 This specification applies only to new insulating material oil as received prior to any processing. Information on in-service maintenance testing is available in appropriate guides. The user should contact the manufacturers of the equipment or oil if questions of recommended characteristics or maintenance procedures arise.

2. Referenced Documents

D5949-16(2022)	Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)
D5950-14(2020)	Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)
National Electrical Code,	Article 450-23 Available from the National Fire Protection Association, Batterymarch Park, Quincy, MA 02269.
D1816-12(2019)	Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using VDE Electrodes
D2112-15(2023)	Standard Test Method for Oxidation Stability of Inhibited Mineral Insulating Oil by Pressure Vessel
D2300-08(2017)	Standard Test Method for Gassing of Electrical Insulating Liquids Under Electrical Stress and Ionization (Modified Pirelli Method)
D2440-13(2021)	Standard Test Method for Oxidation Stability of Mineral Insulating Oil
D97-17b(2022)	Standard Test Method for Pour Point of Petroleum Products (Includes all amendments and changes 11/29/2022).
D445-23	Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
D664-18e2	Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration (Includes all amendments and changes 1/4/2019).
D924-23	Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
D971-20	Standard Test Method for Interfacial Tension of Insulating Liquids Against Water by the Ring Method
D1275-24	Standard Test Method for Corrosive Sulfur in Electrical Insulating Liquids
D1298-12b(2017)e1	Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method (Includes all amendments and changes 3/14/2023).
D92-18	Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
C57.121	Guide for Acceptance and Maintenance of Less-Flammable Hydrocarbon Fluid in Transformers Available from Institute of Electrical and Electronics Engineers, Inc. (IEEE), 445 Hoes Ln., Piscataway, NJ 08854-4141, http://www.ieee.org.
D923-15(2023)	Standard Practices for Sampling Electrical Insulating Liquids
D117-22	Standard Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Liquids
D974-22	Standard Test Method for Acid and Base Number by Color-Indicator Titration
D1500-12(2017)	Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
D1524-15(2022)	Standard Test Method for Visual Examination of Used Electrical Insulating Liquids in the Field
D1533-20	Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration
D878-01e1	Standard Test Method for Inorganic Chlorides and Sulfates in Insulating Oils
D2668-07(2021)	Standard Test Method for 2,6-di-tert-Butyl- p-Cresol and 2,6-di-tert-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption
D2864-21a	Standard Terminology Relating to Electrical Insulating Liquids and Gases (Includes all amendments and changes 12/14/2021).
D3487-16e1	Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus (Includes all amendments and changes 1/1/2018).
D4052-22	Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
D4059-00(2018)	Standard Test Method for Analysis of Polychlorinated Biphenyls in Insulating Liquids by Gas Chromatography
D4768-11(2019)	Standard Test Method for Analysis of 2,6-Ditertiary-Butyl Para-Cresol and 2,6-Ditertiary-Butyl Phenol in Insulating Liquids by Gas Chromatography