Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Doplňující informace

ASTM D5204-13

Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials

Automaticky přeložený název:

Standardní systém klasifikace polyamid-imidový (PAI), tváření

NORMA vydána dne 1.9.2013

Jazyk
Provedení	PDF - okamžité stažení - 1 848.70 Kč Tištěné - 1 848.70 Kč
Dostupnost	SKLADEM
Cena	1848.70 Kč bez DPH
1 848.70 Kč

Informace o normě:

Označení normy: ASTM D5204-13
Poznámka: NEPLATNÁ
Datum vydání normy: 1.9.2013
Kód zboží: NS-30270
Počet stran: 8
Přibližná hmotnost: 24 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Termoplasty

Anotace textu normy ASTM D5204-13 :

Keywords:

extrusion material, line call-out, molding material, polyamide-imide, ICS Number Code 83.080.20 (Thermoplastic materials)

Doplňující informace


1. Scope
1.1 This classification system covers polyamide-imide materials suitable for injection molding and extrusion. 1.2 The properties included in this classification system are those required to identify the compositions covered. It is possible that other requirements are necessary to identify particular characteristics important to specialized applications. The use of suffixes as shown in Section 1.3 This standard allows for the use of recycled materials provided that specification requirements based upon this classification system are met. 1.4 This classification system and subsequent line call-out (specification) is intended to be a means of calling out plastics materials used in the fabrication of end items or parts. It is not intended for the selection of materials. Material selection needs to be made by those having expertise in the plastics field after careful consideration of the design and the performance required of the part, the environment to which it will be exposed, the fabrication process to be employed, the inherent properties of the material other than those covered by this classification, and the economics. 1.5 The values stated in SI units are to be regarded as the standard. (Reporting in inch-pound units is acceptable.) 1.6 The following precautionary caveat pertains only to the test methods portion, Section 11, of this classification system: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
D149-20	Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
D1708-18	Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
D2863-23	Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
D3641-21	Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
D3892-15(2020)	Standard Practice for Packaging/Packing of Plastics
D4000-23	Standard Classification System for Specifying Plastic Materials
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
IEEE/ASTM SI-10	Standard for Use of the International System of Units (SI): The Modern Metric System
MIL-P-46179A	Plastic Molding and Extrusion Materials, Polyamide-Imide (PAI)
D256-23e1	Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics (Includes all amendments and changes 4/7/2023).
D150-22	Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
D257-14(2021)e1	Standard Test Methods for DC Resistance or Conductance of Insulating Materials (Includes all amendments and changes 5/6/2021).
D618-21	Standard Practice for Conditioning Plastics for Testing
D790-17	Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
D792-20	Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
D883-24	Standard Terminology Relating to Plastics
D1525-17e1	Standard Test Method for Vicat Softening Temperature of Plastics (Includes all amendments and changes 9/15/2017).
D1600-18	Standard Terminology for Abbreviated Terms Relating to Plastics (Withdrawn 2024)

Podobné normy:

ASTM D4066-13

Historická
1.7.2013

ASTM D4094-07

Historická
1.11.2007

ASTM D4101-14

Historická
1.3.2014

ASTM D4203-12

Historická
15.11.2012

ASTM D4216-13

Historická
1.11.2013

ASTM D4218-96(2008)..

Historická
1.11.2008

Doporučujeme:

Aktualizace technických norem

Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.

Chcete vědět více informací? Podívejte se na tuto stránku.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.