Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography
Automaticky přeložený název:
Standardní zkušební metoda pro analýzu styrenu pomocí kapilární plynové chromatografie
NORMA vydána dne 1.2.2014
Označení normy: ASTM D5135-14
Poznámka: NEPLATNÁ
Datum vydání normy: 1.2.2014
Kód zboží: NS-29973
Počet stran: 5
Přibližná hmotnost: 15 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
analysis by gas chromatography, impurities in styrene, purity of styrene, styrene, styrene monomer, ICS Number Code 71.080.15 (Aromatic hydrocarbons)
Significance and Use |
5.1 This test method is designed to obtain styrene purity on the basis of impurities normally present in styrene and may be used for final product inspections and process control. 5.2 This test method will detect the impurities shown in 1.1 This test method covers the determination of the impurities typically found in styrene and uses those values to determine the purity of styrene by difference by gas chromatography. Typical impurities in commercial styrene are found in Ethylbenzene |
o-xylene |
m-xylene |
p-xylene |
Isopropylbenzene |
n-propylbenzene |
m-ethyltoluene |
p-ethyltoluene |
α-methylstyrene |
m-vinyltoluene |
p-vinyltoluene |
Phenylacetylene |
1.2 This test method is applicable to impurity concentrations in the range of 0.001 to 1.00 % and for styrene purities of 99 % or higher when using the internal standard procedure.
1.3 In determining the conformance of the test results using this method to applicable specifications, results shall be rounded off in accordance with the rounding-off method of Practice E29.
1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.5 This standard does not purport to address all the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For a specific hazard statement, see Section 9.
Standard Terminology of Aromatic Hydrocarbons and Related Chemicals |
|
Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
|
Standard Practice for Gas Chromatography Terms and Relationships (Includes all amendments and changes 4/28/2021). |
|
Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
|
Standard Practice for Sampling and Handling Liquid Cyclic Products |
|
Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards |
|
Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials (Includes all amendments and changes 10/20/2020). |
|
Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs |
Historická
1.6.2012
Historická
1.12.2008
Historická
1.6.2013
Historická
15.6.2011
Historická
1.11.2012
Historická
1.6.2011
Poslední aktualizace: 04.11.2024 (Počet položek: 2 209 323)
© Copyright 2024 NORMSERVIS s.r.o.