Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Methods for Lead and Manganese in Gasoline by X-Ray Fluorescence Spectroscopy
Přeložit název
NORMA vydána dne 1.4.2021
Označení normy: ASTM D5059-21
Datum vydání normy: 1.4.2021
Kód zboží: NS-1022046
Počet stran: 7
Přibližná hmotnost: 21 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
aviation gasoline, gasoline, lead, low lead, manganese, TEL, tetraethyllead, X-ray, X-ray fluorescence,, ICS Number Code 75.160.20 (Liquid fuels)
Significance and Use | ||||||||
4.1?These test methods determine the concentration of lead (from alkyl addition) in gasoline. These alkyl additives improve the antiknock properties. 4.2?Test Method C is used to ensure compliance of trace lead as required by federal regulations for lead-free gasoline (40 CFR Part 80). 4.3?Test Method D is used to determine the concentration of manganese in aviation gasoline. |
||||||||
1. Scope | ||||||||
1.1?These test methods cover the determination of lead and manganese gasoline additives content by X-Ray Fluorescence Spectroscopy (XRF). These test methods cover the determination of the total lead content of a gasoline within the following concentration ranges:
1.1.1?Test Methods A and B cover the range of 0.10 g Pb/US gal to 5.0 g Pb/US gal. Test Method C covers the range of 0.010 g Pb/US gal to 0.50 g Pb/US gal. 1.1.2?These Methods A, B, and C are applicable to gasoline containing lead additives. These test methods compensate for normal variation in gasoline composition and are independent of lead alkyl type. 1.1.3?Test Method D is applicable to aviation gasoline containing manganese additives. 1.2?Test Method A (formerly in withdrawn Test Method D2599)Sections 5 10. Test Method B (formerly in withdrawn Test Method D2599)Sections 11 16. Test Method C (formerly in withdrawn Test Method D3229)Sections 17 23. Test Method DSections 24 29. 1.3?The values stated in SI are to be regarded as the standard. For reporting purposes the values stated in grams per U.S. gallon are the preferred units in the United States. Note that in other countries, other units can be preferred. 1.4?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||
2. Referenced Documents | ||||||||
|
Poslední aktualizace: 22.11.2024 (Počet položek: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.