Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Dust Control Material on Calcined Petroleum Coke
Automaticky přeložený název:
Standardní zkušební metoda pro Dust Control Materiál na kalcinované ropný koks
NORMA vydána dne 1.5.2011
Označení normy: ASTM D4930-06(2011)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.5.2011
Kód zboží: NS-29178
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
calcined petroleum coke, de-dusting material, dust control material, ICS Number Code 75.160.10 (Solid fuels)
Significance and Use | ||||||||||
The test is designed to quantify the amount of dust control material added to calcined coke. The dust control material is applied to calcined coke to help maintain a dust-free environment. It generally serves no other useful purpose. It adds weight to the coke and can have a negative effect on the quality of carbon and graphite artifacts made from the treated coke. For these reasons the coke customer wants to know the amount of dust control material on the coke and can specify a maximum level. |
||||||||||
1. Scope | ||||||||||
1.1 This test method covers the determination of the amount of material applied to calcined coke to control dust associated with coke handling and transportation. 1.2 This test method is limited to those materials that are soluble in a solvent that can be used in a Soxhlet extraction type of apparatus such as methylene chloride (dichloro-methane). Note 1—Methylene chloride is the most popular solvent for removing dust control oil at the time this procedure is being written. Toluene and methyl chloroform, however, have been used with equal results on all cokes tested which have included only those sprayed with aromatic or waxy materials. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see Section 7. |
||||||||||
2. Referenced Documents | ||||||||||
|
Historická
1.2.2008
Historická
1.5.2010
Historická
1.5.2010
Historická
1.3.2014
Historická
1.6.2014
Historická
1.12.2009
Poslední aktualizace: 22.11.2024 (Počet položek: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.