Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

NEPLATNÁ ASTM D4844-03(2009) 1.2.2009 náhled

Doplňující informace

ASTM D4844-03(2009)

Standard Guide for Air Monitoring at Waste Management Facilities for Worker Protection

Automaticky přeložený název:

Standardní Guide pro monitorování při nakládání s odpady, o ochraně pracovníků ovzduší

NORMA vydána dne 1.2.2009

Jazyk
Provedení	PDF - okamžité stažení - 2 020.00 Kč Tištěné - 2 020.00 Kč
Dostupnost	SKLADEM
Cena	2 020.00 Kč bez DPH
2 020.00 Kč

Informace o normě:

Označení normy: ASTM D4844-03(2009)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.2.2009
Kód zboží: NS-28851
Počet stran: 8
Přibližná hmotnost: 24 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Instalace a zařízení pro odstraňování a zpracování odpadů
Emise ze stacionárních zdrojů

Anotace textu normy ASTM D4844-03(2009) :

Keywords:

disposal, hazardous, airborne, emissions, ICS Number Code 13.030.40 (Installations and equipment for waste disposal and treatment), 13.040.40 (Stationary source emissions)

Doplňující informace

Significance and Use

The techniques of air monitoring are many and varied. This guide is intended to describe the standard approaches that are used in designing an air monitoring program to protect waste management site workers.

When entering a remedial action site to initiate an investigation or a cleanup operation, operating personnel may be faced with the extreme hazards of fire, explosion, and acute or chronic health hazards. A thorough safety and health program, including a site-specific safety and health plan, must be in place to direct worker activity. Details for such plans can be found in the OSHA Interim Final Rule for Hazardous Waste Operations and Emergency Response and Refs (1, 2). Air monitoring is an integral part of such a program. This guide describes equipment and sampling procedures which can be used to evaluate the airborne hazard potential so as to gain and maintain control over the situation at the site.

Upon obtaining readings at the site, a decision must be made as to whether conditions are under control or not. That decision will depend on the nature of the contaminants (toxicity, reactivity, volatility, etc.), the extent (area affected, number of workers, etc.) of the problem and the level of worker protection available. Since all such parameters will be site specific, the necessary decision-making is beyond the range of this guide.

This guide does not include monitoring sites containing radioactive materials, nor does it cover general safety aspects, such as access to emergency equipment or medical support of emergency needs. These items should be covered in a safety and health plan.

It is recommended that this guide be used in conjunction with Guide D 4687.

1. Scope

1.1 This guide is intended to provide a standardized approach for establishing and carrying out an air monitoring program to protect workers at waste management facilities. This guide may apply to routine operations at an active treatment, storage, or disposal site or the extraordinary conditions that can be encountered in opening and cleaning up a remedial action site.

1.2 Any user of this guide must understand that it is impossible to predict all the difficulties that could develop at a waste management facility due to hazardous airborne emissions. Although air contaminant measurements obtained in accordance with this guide may indicate acceptable or tolerable levels of toxic agents are present, care and judgment must still be exercised before concluding that all atmospheric contaminants at the site are under control.

2. Referenced Documents

D3449-79(1984)	Method of Test for Sulfur Dioxide in Workplace Atmospheres (Barium Perchlorate Method)
D1356-20a	Standard Terminology Relating to Sampling and Analysis of Atmospheres (Includes all amendments and changes 9/7/2020).
E1370-21	Standard Guide for Air Sampling Strategies for Worker and Workplace Protection
D6562-20	Standard Test Method for Determination of Gaseous Hexamethylene Diisocyanate (HDI) in Air with 9-(N-methylaminomethyl) Anthracene Method (MAMA) in the Workplace
D6785-20	Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
D6832-13(2018)	Standard Test Method for the Determination of Hexavalent Chromium in Workplace Air by Ion Chromatography and Spectrophotometric Measurement Using 1,5-diphenylcarbazide
D7035-21	Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
D7036-16	Standard Practice for Competence of Air Emission Testing Bodies
D7539-10(2020)	Standard Practice for Using a Test Chamber for Humidity Conditioning of Test Panels of Pavement Marking Paints
D7773-19	Standard Test Method for Determination of Volatile Inorganic Acids (HCl, HBr, and HNO3) Using Filter Sampling and Suppressed Ion Chromatography
D7948-20	Standard Test Method for Measurement of Respirable Crystalline Silica in Workplace Air by Infrared Spectrometry
ISO 17025	General Requirements for the Competence of Testing and Calibration Laboratories Adopted by ASTM as an American National Standard.
OSHA
NIOSH	Manual for Analytical Methods Fifth edition manual, January 2015, available from the National Institute of Occupational Safety and Health, (NIOSH), Cincinnati, OH.
OSHA, 29	CFR Part 1910 Hazardous Waste Operations and Emergency Response; Interim Final Rule, December 1986 Available from the Superintendent of Documents, Government Printing Office, Washington, DC, 20401.
D3686-20	Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)
D4323-21	Standard Test Method for Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance
D4490-23	Standard Practice for the Use of Detector Tubes in the Measurement of Toxic Gases and Vapors
D4532-22	Standard Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers
D4599-21	Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
D4600-22	Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
D4687-14(2022)	Standard Guide for General Planning of Waste Sampling
D5681-23	Standard Terminology for Waste and Waste Management
D6561-20	Standard Test Method for Determination of Aerosol Monomeric and Oligomeric Hexamethylene Diisocyanate (HDl) in Air with (Methoxy-2-phenyl-1) Piperazine (MOPIP) in the Workplace
D3824-20	Standard Test Methods for Continuous Measurement of Oxides of Nitrogen in the Ambient or Workplace Atmosphere by Chemiluminescence
D4185-23	Standard Test Method for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry
D3413-85	Method of Test for Lead (Inorganic) in Workplace Atmospheres by Atomic Absorption Spectrometry (Withdrawn 1989)
D3269-96(2001)e1	Standard Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Manual Procedures) (Withdrawn 2010)
D3249-95(2019)	Standard Practice for General Ambient Air Analyzer Procedures
D3162-21	Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
D2913-20	Standard Test Method for Mercaptan Content of the Atmosphere
D2820-72(1978)	Test Method for C through C Hydrocarbons in the Atmosphere by Gas Chromatography (Withdrawn 1993)
D1605-60(1990)	Recommended Practices for Sampling Atmospheres for Analysis of Gases and Vapors (Withdrawn 1992)
D3687-19	Standard Test Method for Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube Adsorption Method
D3614-07(2021)	Standard Guide for Laboratories Engaged in Sampling and Analysis of Atmospheres and Emissions
D4240-83(1989)	Test Method for Airborne Asbestos Concentration in Workplace Atmosphere (Withdrawn 1995)
D3476-	Method of Test for BIS (Chloromethyl) Ether (BIS CME) in Workplace Atmospheres (Gas Chromatography-Mass Spectrometry) (Withdrawn 1989)

Podobné normy:

ASTM D5233-92(2009)..

Historická
1.9.2009

ASTM D5468-02(2007)..

Historická
1.2.2007

ASTM D5526-12

Historická
1.5.2012

ASTM D5658-13

Historická
1.4.2013

ASTM D5679-95a(2012)..

Historická
1.11.2012

ASTM D5680-14

Historická
1.6.2014

Odebírejte informace o nově vydaných normách ZDARMA:

Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.