Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics
Automaticky přeložený název:
Standard Specification pro flexibilní Mobilní materiály vyrobené z plastů Polyolefin
NORMA vydána dne 1.9.2013
Označení normy: ASTM D4819-13
Poznámka: NEPLATNÁ
Datum vydání normy: 1.9.2013
Kód zboží: NS-28746
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
closed cell, flexible cellular materials, polyolefin specification, ICS Number Code 83.100 (Cellular materials)
1. Scope | ||||||||||||||||||
1.1 This specification applies to flexible closed-cell materials made from polyolefin plastics and blends of polyolefin plastics as defined in Section 3. 1.2 Extruded or molded shapes too small to permit the cutting of standard test specimens are difficult to classify or test by standard test methods and will usually require special testing procedures or the use of standard test sheets. 1.3 In case of conflict between the provisions of this specification and those of detailed specifications for a particular product, the latter shall take precedence. These detailed specifications for the flexible closed-cell polyolefin plastic foams shall state the particular test or tests desired. 1.4 In cases involving referee decisions, SI units shall be used. 1.5 This specification does not contain test procedures or values for all the suffix letters listed in 1.6 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
|
|
Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
|
|
Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
|
|
Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
|
|
Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material
|
|
Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
|
|
Standard Test Methods for Flexible Cellular Materials Made from Olefin Polymers
|
|
Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
|
|
Standard Test Method for Impact Attenuation of Playing Surface Systems, Other Protective Sport Systems, and Materials Used for Athletics, Recreation and Play
|
MVSS-302
|
Flammability of Vehicle Interior Materials--Passenger Cars, Multipurpose Passenger Vehicles, Trucks and Buses Available from Department of Transportation, Washington, DC. |
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 22.11.2024 (Počet položek: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.