Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Methods for Gravimetric Analysis of White and Yellow Thermoplastic Traffic Marking (Includes all amendments And changes 2/13/2018).
Automaticky přeložený název:
Standardní zkušební metody pro Gravimetrická analýzu bílé a žluté Thermoplastic dopravní značení
NORMA vydána dne 1.11.2012
Označení normy: ASTM D4797-12a
Poznámka: NEPLATNÁ
Datum vydání normy: 1.11.2012
Kód zboží: NS-28603
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
binder, lead chromate, non-retroreflective particles, organic pigment, retroreflective optics, thermoplastic traffic marking material, titanium dioxide, ICS Number Code 93.080.30 (Road equipment and installations)
Significance and Use | ||||||||||||
5.1 The function of these test methods is to define the percent of binder and retroreflective optics or non-retroreflective particles in the composition of the thermoplastic traffic marking as defined by the applicable specification for the manufacture of a specific thermoplastic traffic marking. The subsequent sample, as a result of ashing can be used to later test for the presence of titanium dioxide, lead chromate and possibly organic pigments. |
||||||||||||
1. Scope | ||||||||||||
1.1 These test methods cover procedures for the gravimetric analysis of the binder and hydrochloric Acid (HCL) insoluble particles in white and yellow thermoplastic traffic markings. The HCL insoluble particles can be retroreflective optics, such as glass beads or some other type of retroreflective optic, or non-retroreflective particles such as silica sand, or a combination of any two or more of these materials. 1.2 This standard does not address the physical separation and the individual quantification of each component when a mixture of two or more HCL insoluble materials is present. Rather it requires the user to visually evaluate the HCL insoluble material (obtained from following this test method) and report the types of materials present. 1.3 This standard does not purport to address the titanium dioxide or lead chromate pigment measurement (after ashing) which is detailed in Test Methods D1394 and D126. 1.4 This standard will attempt to address the interference of organic pigments with the binder results. 1.5 The analytical procedures appear in the following order:
1.6 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||
2. Referenced Documents | ||||||||||||
|
Historická
1.12.2010
Historická
1.12.2010
Historická
1.12.2010
Historická
1.12.2010
Historická
15.12.2013
Historická
1.11.2013
Poslední aktualizace: 22.11.2024 (Počet položek: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.