Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors
Automaticky přeložený název:
Standard Specification pro pevné poly (vinylchloridu) (PVC) Vnější profil Extrusions Používá se pro montované okna a dveře
NORMA vydána dne 1.3.2009
Označení normy: ASTM D4726-09
Poznámka: NEPLATNÁ
Datum vydání normy: 1.3.2009
Kód zboží: NS-28321
Počet stran: 12
Přibližná hmotnost: 36 g (0.08 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
color-hold guidelines, doors, exterior-profile extrusions, poly(vinyl chloride) (PVC), recycled plastic, windows, Color--plastics, Dimensional stability, Doors/door assemblies--specifications, Exterior doors--specifications, Exterior profile extrusions, Exterior windows--specifications, Extrusions, Poly(vinyl chloride)(PVC)--specifications, Poly(vinyl chloride)( PVC) doors, Poly(vinyl chloride)( PVC) windows, Profiles, Rigid cellular plastics, Rigid plastics--specifications
1. Scope | ||||||||||||||||||||||||||||
1.1 This specification establishes requirements for the material properties, including dimensional stability, weatherability, and extrusion quality, of rigid poly(vinyl chloride) (PVC) exterior profile extrusions used for assembled windows and doors. Methods for testing and for identifying exterior profile extrusions that comply with this specification are also provided. 1.2 Rigid PVC recycled plastic may be used in this product in accordance with requirements in Section 5. Note 1—Information with regard to application, assembly, and installation should be obtained from the manufacturers of the profiles and of the windows and doors. Note 2—Refer to Specification D 3678 for interior profile extrusions. 1.3 Color-hold guidelines are provided in an appendix for the manufacturer's product development and quality performance use. 1.4 Color-hold guidelines are presently limited to white, grey, beige, light brown, and dark brown (see Figs. X1.1 through X1.5). Additional colors will be added as color guidelines are developed. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. Note 3—There are no ISO standards covering the primary subject matter of this specification. 1.6 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of this standard. 1.7 The following safety hazards caveat pertains only to the test methods portion, Section 10, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||||||
|
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 01.11.2024 (Počet položek: 2 208 817)
© Copyright 2024 NORMSERVIS s.r.o.