Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM D4413-98e1
Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (Charcoal Tube Methodology) (Includes all amendments And changes 8/16/2017).
Automaticky přeložený název:
Standardní zkušební metoda pro stanovení ethylenoxid v ovzduší na pracovišti ( Charcoal Tube metodika )
NORMA vydána dne 10.10.1998
Informace o normě:
Označení normy: ASTM D4413-98e1
Poznámka: NEPLATNÁ
Datum vydání normy: 10.10.1998
Kód zboží: NS-27124
Počet stran: 8
Přibližná hmotnost: 24 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Anotace textu normy ASTM D4413-98e1 :
Keywords:
Atmospheric analysis-workplace, ethylene oxide content, by charcoal tube method,, Charcoal adsorption method, Chromatography-gas (atmospheric analysis), Gases-atmospheric, Hazard potential-health, ethylene oxide content in workplace atmospheres, by charcoal tube, method,, Ethylene oxide (ETO)-workplace, workplace ethylene oxide content in workplace atmospheres, by charcoal, tube method
Doplňující informace
| 1. Scope | ||||||
|
1.1 This test method describes the determination of ethylene oxide (oxirane) in workplace atmospheres using charcoal tube methodology. 1.2 This procedure is compatible with low flow rate personal sampling equipment: 10 to 200 mL/min. It can be used for personnel or area monitoring. 1.3 The sampling method develops a time-weighted average (TWA) sample and can be used to determine short-term excursions (STE). 1.4 The applicable concentration range for the TWA sample is from 0.3 to 20 ppm (v/v). 1.5 The applicable concentration range for the STE sample ranges from 1 to 1000 ppm (v/v). 1.6 The values stated in SI units shall be regarded as the standard. Inch-pound units are provided for information only. 1.7 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. (For more specific safety precautionary statements see Section 9, 10.2.3, and 11.1.3.) |
||||||
| 2. Referenced Documents | ||||||
|
Doporučujeme:
