Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications
Automaticky přeložený název:
Standardní specifikace pro pevné poly (vinyl chloridu ) (PVC) a chlorovaných poly (vinyl chloridu ) ( CPVC ) sloučeniny pro plastové trubky a jiná kování použitá u netlakové aplikace
NORMA vydána dne 1.10.2015
Označení normy: ASTM D4396-15
Poznámka: NEPLATNÁ
Datum vydání normy: 1.10.2015
Kód zboží: NS-618471
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
chlorinated poly(vinyl chloride), nonpressure piping, poly(vinyl chloride) plastic, recycle plastics, rigid plastic, vinyl chloride copolymer,, ICS Number Code 23.040.20 (Plastic pipes)
1. Scope | ||||||||||||||||||||||||
1.1 This specification covers the classification and identification of rigid plastic compounds intended for use in making nonpressure piping products composed of 1.2 The requirements in this specification are intended for the quality control of compounds used to manufacture pipe or fittings intended for nonpressure use. They are not applicable to finished pipe and finished fittings. See the applicable ASTM standards or requirements for finished products. 1.3 In special cases, specific compounds for unusual piping applications that require consideration of other properties not covered in this specification, such as service temperature, sag resistance, special chemical resistance, weather resistance, bending forces, and electrical properties, shall be considered. 1.4 Rigid PVC-type compounds for building applications other than piping are covered in Specification D4216. 1.5 Rigid PVC compounds for general purpose extrusion, molding, fitting, and pipe are covered in Specification D1784. 1.6 The rate of burning test, Test Method D635, is used in this specification as a test for identification of certain properties of the compound. 1.7 It is acceptable for rigid PVC and CPVC recycle plastics meeting the requirements of this specification to be used in some applications. Refer to the specific requirements in the Material and Manufacture section of the applicable product standard. 1.8 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.9 The following safety hazards caveat pertains only to the test methods portion, Section 10, of this specification: Note 1: There is no known ISO equivalent to this standard. |
||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||
|
Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.
Poslední aktualizace: 25.04.2024 (Počet položek: 2 896 007)
© Copyright 2024 NORMSERVIS s.r.o.