Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM D4311/D4311M-21
Standard Practice for Determining Asphalt Volume Correction to a Base Temperature
Přeložit název
NORMA vydána dne 15.12.2021
Informace o normě:
Označení normy: ASTM D4311/D4311M-21
Datum vydání normy: 15.12.2021
Kód zboží: NS-1046471
Počet stran: 9
Přibližná hmotnost: 27 g (0.06 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Kategorie - podobné normy:
Anotace textu normy ASTM D4311/D4311M-21 :
Keywords:
base temperature, volume correction,, ICS Number Code 91.100.50 (Binders. Sealing materials),93.080.20 (Road construction materials)
Doplňující informace
| Significance and Use | |||||||||
|
3.1?Asphalts change in volume with change in temperature. They are loaded or transferred at widely varying temperatures. Volume correction factors are used to adjust bulk volumes measured at those temperatures to corresponding volumes at a base temperature of 15 ?C or [60 ?F] for the purposes of custody transfer and accounting operations. 3.2?Correction factors as provided in this practice have proven to be sufficiently accurate for the intended purposes. 3.3?Coefficients of expansion used for development of data in this practice are as follows:
|
|||||||||
| 1. Scope | |||||||||
|
1.1?This practice provides tables of volume correction factors which may be used to convert volumes of asphalt measured at different temperatures to a volume at a standard base temperature. These tables are applicable to all types of asphalts except emulsified asphalts. 1.2?This practice provides tables to convert asphalt volumes to 15 ?C [60 ?F] from volumes measured at any temperature from ?25 to +275 ?C [0 to 500 ?F]. 1.3?The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. Note 1:?Correction factors in Table 1 and Table 2 are for use in place of
correction factors provided in Guide D1250, which do not address requirements
for asphalt specifications.2
1.4?The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. 1.5?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
|||||||||
| 2. Referenced Documents | |||||||||
|
Odebírejte informace o nově vydaných normách ZDARMA:
Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.
