Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
Automaticky přeložený název:
Standardní praxe leteckých pohonných hmot Nádoby na vzorky pro testy postižených Trace kontaminace
NORMA vydána dne 15.6.2013
Označení normy: ASTM D4306-13
Poznámka: NEPLATNÁ
Datum vydání normy: 15.6.2013
Kód zboží: NS-26773
Počet stran: 6
Přibližná hmotnost: 18 g (0.04 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
aviation fuels, containers, sampling, containers, shipping, turbine fuels, ICS Number Code 75.160.20 (Liquid fuels)
Significance and Use | ||||||||||||
3.1 General descriptions for the manual sampling of petroleum products are given in Practice D4057. However, a number of aviation fuel properties are established or affected by trace levels of polar or other compounds. Measurement significance therefore requires that the sample containers not add or adsorb any materials. This practice presents types and preparations of sampling containers found satisfactory for the determination of water separation, copper corrosion, electrical conductivity, thermal stability, lubricity, and trace metal content. An approval procedure for new containers is also given. 3.2 Two properties, particulate contamination and free water content, involve materials easily removed by any sampling container. These properties should be determined by placing the sample directly into the measuring apparatus and not using containers to transport the sample to the measuring equipment. 3.3 Recommendations in this practice provide guidance for immediate use and for storage of samples. Immediate use involves sample storage for periods less than 24 h. |
||||||||||||
1. Scope | ||||||||||||
1.1 This practice2 covers the types of and preparation of containers found most suitable for the handling of aviation fuel samples for the determination of critical properties affected by trace contamination. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not
purport to address all of the safety concerns, if any, associated
with its use. It is the responsibility of the user of this standard
to establish appropriate safety and health practices and determine
the applicability of regulatory limitations prior to use.
Standard Practice for Manual Sampling of
Petroleum and Petroleum Products Standard Test Method for Electrical
Conductivity of Liquid Hydrocarbons by Precision Meter Standard Test Method for Particulate
Contamination in Aviation Fuels by Laboratory Filtration MAP1794 Standard Test Methods for Electrical
Conductivity of Aviation and Distillate Fuels Standard Test Method for Determining
Water Separation Characteristics of Aviation Turbine Fuels by
Portable Separometer |
Poslední aktualizace: 04.11.2024 (Počet položek: 2 209 323)
© Copyright 2024 NORMSERVIS s.r.o.