Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM D4293-83(2008)
Standard Specification for Phosphate Ester Based Fluids for Turbine Lubrication
Automaticky přeložený název:
Standardní specifikace pro fosfátester kapaliny na bázi pro Turbine mazání
NORMA vydána dne 15.10.2008
Informace o normě:
Označení normy: ASTM D4293-83(2008)
Poznámka: NEPLATNÁ
Datum vydání normy: 15.10.2008
Kód zboží: NS-26717
Počet stran: 2
Přibližná hmotnost: 6 g (0.01 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Anotace textu normy ASTM D4293-83(2008) :
Keywords:
phosphate, ester based, fluids, turbine, lubrication, Fire-resistant fluids, Lubricants (fluid)--specifications, Petroleum products--specifications, Phosphate ester lubricants, Turbine lubricants
Doplňující informace
| Significance and Use | ||||||||||||||||||||||||||||||||||||||
|
This is a specification to define the requirements of fire resistant fluids for use in turbine lubrication. This specification defines phosphate ester fluids which will give satisfactory lubrication performance in a turbine engine. However, it is possible that phosphate esters that do not meet this specification may give adequate performance in the field. Fire resistant fluids are more difficult to ignite and show little tendency to propagate a flame. The term “fire resistant fluid” does not mean that the fluid will not burn. The normal fluid operating temperature will be in the range of 54 to 65°C and will experience a maximum temperature of about 93°C during flow across the turbine bearings whose housing temperature may be as high as 343°C. |
||||||||||||||||||||||||||||||||||||||
| 1. Scope | ||||||||||||||||||||||||||||||||||||||
|
1.1 This specification covers the requirements for phosphate ester based fire resistant fluids for use in turbine lubrication. 1.2 The specification defines only unused fluid before it is installed in the turbine. It is not intended for fluids used in electrohydraulic control (EHC) systems. 1.3 The use of this type of fluid is restricted to turbine systems that have been designed or modified to accommodate phosphate ester lubricants. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 The following precautionary caveat pertains only to Sections 5 and 5.3. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||||||||||||||||||||||||||||
| 2. Referenced Documents | ||||||||||||||||||||||||||||||||||||||
|
Doporučujeme:
Aktualizace technických norem
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
