Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion
Přeložit název
NORMA vydána dne 1.5.2022
Označení normy: ASTM D4282-15(2022)
Datum vydání normy: 1.5.2022
Kód zboží: NS-1057590
Počet stran: 6
Přibližná hmotnost: 18 g (0.04 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
free cyanide, hexacyanoferrate, instability, microdiffusion, micropipet, pyridine-barbaturic acid, spectrophotometer, wastewater,, ICS Number Code 13.060.50 (Examination of water for chemical substances)
Significance and Use | ||||||||||||||||||||||
5.1?This test method is useful in distinguishing between the potentially available free cyanide (total cyanide) and the free cyanide actually present. 5.2?This test method provides a convenient technique for making on-site free cyanide determinations. |
||||||||||||||||||||||
1. Scope | ||||||||||||||||||||||
1.1?This test method covers the determination of free cyanides in waters and wastewaters. Free cyanide is here defined as the cyanide which diffuses as cyanide (HCN), at room temperature, from a solution at pH 6.1.2?This test method does not include complexes that resist dissociation, such as hexacyanoferrates and gold cyanide, nor does it include thiocyanate and cyanohydrin. 1.3?This test method may be applied to water and wastewater samples containing free cyanide from 10 to 150 ?g/L. Greater concentrations may be determined by appropriate dilution. 1.4?This test method has been fully validated by collaborative testing as specified by Practice D2777. 1.5?The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||
|
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 21.11.2024 (Počet položek: 2 206 478)
© Copyright 2024 NORMSERVIS s.r.o.