Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
Přeložit název
NORMA vydána dne 1.10.2022
Označení normy: ASTM D4176-22
Datum vydání normy: 1.10.2022
Kód zboží: NS-1087143
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
cleanliness, distillate fuel, free water, particulate contamination, visual inspection, visual ratings,, ICS Number Code 75.160.20 (Liquid fuels)
Adjunct to D4176 Distillate Fuel Bar Chart
Vybrané provedení:Adjunct to D4176 Distillate Fuel Haze Rating Standard
Vybrané provedení:Significance and Use | ||||||||||||||||
5.1?It has long been the practice to include in fuel specifications a requirement that the fuel be clear and bright and free of visible particulate matter (see Note 1). However, there has been no standard method for making this determination so that practices have differed. This test method provides standard procedures for the test. Note 1:?5.2?Procedure 1 provides a rapid pass/fail
method for contamination in a distillate fuel. Procedure 2 provides
a gross numerical rating of haze appearance, primarily as a
communication tool. Other test methods, including Test Methods
D2276, D2709, and D4860, permit quantitative determinations
of contaminants. No relationship has been established between
Procedure 2 and these quantitative methods.
5.2.1?Test Method D8148 has established a correlating relationship with Procedure 2 appearance rating numbers by reporting a correlating instrument haze rating (IHR) based upon its spectroscopically determined haze clarity index (HCI). Supporting data can be found in RR:D02-1876.5 5.3?Limited laboratory evaluations of samples that have failed this clear and bright test indicate that an experienced tester can detect as little as 40 ppm of free water in the fuel. |
||||||||||||||||
1. Scope | ||||||||||||||||
1.1?This test method covers two procedures for estimating the presence of suspended free water and solid particulate contamination in distillate fuels having distillation end points below 400 ?C and an ASTM color of 5 or less. 1.1.1?Both procedures can be used as field tests at storage temperatures, or as laboratory tests at controlled temperatures. 1.1.2?Procedure 1 provides a rapid pass/fail method for contamination. Procedure 2 provides a gross numerical rating of haze appearance. 1.2?The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||||||||
2. Referenced Documents | ||||||||||||||||
|
Poslední aktualizace: 22.12.2024 (Počet položek: 2 217 000)
© Copyright 2024 NORMSERVIS s.r.o.