Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Low-Temperature Coalescence of Latex Paint Films by Porosity Measurement (Withdrawn 2012)
Automaticky přeložený název:
Standardní zkušební metoda pro nízkoteplotní srůstání Latexová barva filmů Porozita měření (Withdrawn 2012 )
NORMA vydána dne 1.11.2006
Označení normy: ASTM D3793-06
Poznámka: NEPLATNÁ
Datum vydání normy: 1.11.2006
Kód zboží: NS-24896
Počet stran: 2
Přibližná hmotnost: 6 g (0.01 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
coalescence, latex paint, porosity, ICS Number Code 87.040 (Paints and varnishes)
Significance and Use | ||||
This test method provides no absolute information, rather ranking only of the selected series of paints. This test method can provide a pass-fail situation if known acceptable and unacceptable paints are included in the test. |
||||
1. Scope | ||||
1.1 This test method covers the determination of the comparative coalescence of a series of latex paints by determining the porosity of films dried at standard and at low temperature. Porosity is evaluated with a penetrating medium as in Test Method D 3258. 1.2 The texture of the film, which can affect cleanup, will influence the results of the test. Stain applied to a high-hiding paint will not lower the reflectance as much as the same stain applied to a low-hiding paint of equal porosity. These points must be considered in comparing the different paints. 1.3 This method should be used only for comparative testing within one laboratory, as the numerical results obtained by different laboratories do not usually agree. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||
2. Referenced Documents | ||||
|
Poslední aktualizace: 04.11.2024 (Počet položek: 2 209 323)
© Copyright 2024 NORMSERVIS s.r.o.