Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM D3754-06
Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
Automaticky přeložený název:
Standardní specifikace pro " skleněných vláken " ( Glass - Fiber - Reinforced Teplem - pryskyřice ) Kanalizace a průmyslové tlakové potrubí
NORMA vydána dne 1.11.2006
Informace o normě:
Označení normy: ASTM D3754-06
Poznámka: NEPLATNÁ
Datum vydání normy: 1.11.2006
Kód zboží: NS-24732
Počet stran: 14
Přibližná hmotnost: 42 g (0.09 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Anotace textu normy ASTM D3754-06 :
Keywords:
fiberglass pipe, sewer pipe, industrial pipe, pressure, pipe, strain corrosion, hrdrostatic design basis
Doplňující informace
| 1. Scope | ||||||||||||||||||||||||||||||||||||||
|
1.1 This specification covers machine-made fiberglass pipe, 8 in. (200 mm) through 156 in. (4000 mm), for use in pressure systems for conveying sanitary sewage, storm water, and many industrial wastes, and corrosive fluids. Both glass-fiber-reinforced thermosetting-resin pipe (RTRP) and glass-fiber-reinforced polymer mortar pipe (RPMP) are fiberglass pipes. This standard is suited primarily for pipes to be installed in buried applications, although it may be used to the extent applicable for other installations such as, but not limited to, jacking, tunnel lining and slip-lining and rehabilitation of existing pipelines. Pipe covered by this specification is intended to operate at internal gage pressures of 450 psi (3103 kPa) or less. Note 1—For the purposes of this standard, polymer does not include natural polymers. 1.2 The values given in inch-pound units are to be regarded as the standard. The values given in parentheses are provided for information purposes only. Note 2—There is no similar or equivalent ISO standard. 1.3 The following precautionary caveat pertains only to the test method portion, Section 8, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||||||||||||||||||||||||||||
| 2. Referenced Documents | ||||||||||||||||||||||||||||||||||||||
|
Doporučujeme:
