Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Classification of Asbestos by Quebec Standard Test (Includes all amendments And changes 5/6/2019).
Automaticky přeložený název:
Standardní zkušební metoda pro klasifikaci azbestu Quebec standardní zkušební
NORMA vydána dne 1.11.2011
Označení normy: ASTM D3639/D3639M-92(2011)e1
Poznámka: NEPLATNÁ
Datum vydání normy: 1.11.2011
Kód zboží: NS-24298
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
amphibole, asbestos, Canadian, chrysotile, classification, dry test, evaluation, fiber, Q.S., Quebec standard screening test, ICS Number Code 91.100.40 (Products in fibre-reinforced cement)
Significance and Use | ||||||||||||||||
The Quebec Standard Testing Machine classifies milled chrysotile asbestos grades according to the mass fractions retained on each screen. Specimens that are not properly conditioned prior to testing or that have excessive moisture content (above 3 % in accordance with Method D2987), or both, may give erratic and false results. Some amphibole asbestos fibers may be classified by this test method but a standard classification for these has not been established. |
||||||||||||||||
1. Scope | ||||||||||||||||
1.1 This test method covers a procedure for dry classification of chrysotile asbestos fiber by length distribution. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3 Warning—Breathing of asbestos dust is hazardous. Asbestos and asbestos products present demonstrated health risks for users and for those with whom they come into contact. In addition to other precautions, when working with asbestos-cement products, minimize the dust that results. For information on the safe use of chrysoltile asbestos, refer to “Safe Use of Chrysotile Asbestos: A Manual on Preventive and Control Measures.” 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See 1.3 for a specific hazard warning. ^REFERENCE: ASTM Standards: D2590 Test Method for Sampling Chrysotile Asbestos D2946 Terminology for Asbestos and Asbestos–Cement Products D2987 Test Method for Moisture Content of Asbestos Fiber D3879 Test Method for Sampling Amphibole Asbestos (Withdrawn) E11 Specification for Woven Wire Test Sieve Cloth and Test Sieves E177 Practice for Use of the Terms Precision and Bias in ASTM Test Methods ASTM Adjunct: Quebec Asbestos Testing Machine Construction and Operation Instructions Quebec Asbestos Mining Association Documents: Quebec Standard Classification of Chrysotile Asbestos Grades Specifications and Drawings for Quebec Standard Asbestos Testing Machine Model No. 2 |
||||||||||||||||
2. Referenced Documents | ||||||||||||||||
|
Historická
1.8.2011
Historická
1.9.2012
Historická
1.6.2012
Historická
1.6.2009
Historická
1.4.2012
Historická
15.1.2014
Poslední aktualizace: 22.11.2024 (Počet položek: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.