Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Removing Volatile Contaminants from Used Engine Oils by Stripping (Withdrawn 2022)
Přeložit název
NORMA vydána dne 1.10.2016
Označení normy: ASTM D3607-08(2016)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.10.2016
Kód zboží: NS-667284
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
contaminants, engine oils, gasoline dilution, used engine oils, water contamination,, ICS Number Code 75.100 (Lubricants, industrial oils and related products)
Significance and Use | ||||||||||
5.1 The removal of volatile materials such as gasoline dilution from used engine oils is especially important if the mechanical shear stability or oxidative stability of the oil is being monitored by measuring a kinematic viscosity change in the oil after it has been used in a gasoline engine. |
||||||||||
1. Scope | ||||||||||
1.1 This test method covers a standardized procedure for removing volatile materials such as gasoline and water from used engine oils prior to further oil analysis. 1.2 It also provides an estimate of such volatiles in used engine oils. 1.3 When an accurate value of the gasoline contaminant is required either Test Methods D322 or D3525 shall be used. Note 1: Test Method D322
determines the amount of gasoline by distillation with water. Test
Method D3525 determines the
amount of material boiling below the boiling point of n–tetradecane
by gas chromatography.
Note 2: When the amount of gasoline is required to be known,
the user of this test method is advised to determine which method
is to be used. There are cases where D3525 may be set as the referee
method.
1.4 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.5 This standard does not purport to
address all of the safety concerns, if any, associated with its
use. It is the responsibility of the user of this standard to
consult and establish appropriate safety and health practices and
determine the applicability of regulatory limitations prior to use.
Standard Practice for Manual Sampling of
Petroleum and Petroleum Products Standard Test Method for Gasoline Diluent
in Used Gasoline Engine Oils by Distillation Standard Practice for Automatic Sampling
of Petroleum and Petroleum Products (Includes all amendments and
changes 3/24/2023). Standard Test Method for Kinematic
Viscosity of Transparent and Opaque Liquids (and Calculation of
Dynamic Viscosity) Standard Test Method for Gasoline Fuel
Dilution in Used Gasoline Engine Oils by Wide-Bore Capillary Gas
Chromatography |
Chcete mít jistotu o platnosti užívaných předpisů?
Nabízíme Vám řešení, abyste mohli používat stále platné (aktuální) legislativní předpisy.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 03.05.2024 (Počet položek: 2 896 946)
© Copyright 2024 NORMSERVIS s.r.o.