ASTM D1743-13
ASTM D1744-13
ASTM D1831-11
ASTM D217-10
ASTM D2265-06
ASTM D2266-01(2008)..
Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM D3607-08(2012)
Standard Test Method for Removing Volatile Contaminants from Used Engine Oils by Stripping
Automaticky přeložený název:
Standardní zkušební metoda pro odstranění těkavých nečistot z použitých olejů motor odizolování
NORMA vydána dne 1.11.2012
Informace o normě:
Označení normy: ASTM D3607-08(2012)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.11.2012
Kód zboží: NS-24199
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Kategorie - podobné normy:
Anotace textu normy ASTM D3607-08(2012) :
Keywords:
contaminants, engine oils, gasoline dilution, used engine oils, water contamination, ICS Number Code 75.100 (Lubricants, industrial oils and related products)
Doplňující informace
| Significance and Use | ||||||||||
|
5.1 The removal of volatile materials such as gasoline dilution from used engine oils is especially important if the mechanical shear stability or oxidative stability of the oil is being monitored by measuring a kinematic viscosity change in the oil after it has been used in a gasoline engine. |
||||||||||
| 1. Scope | ||||||||||
|
1.1 This test method covers a standardized procedure for removing volatile materials such as gasoline and water from used engine oils prior to further oil analysis. 1.2 It also provides an estimate of such volatiles in used engine oils. 1.3 When an accurate value of the gasoline contaminant is required either Test Methods D322 or D3525 shall be used. 1.4 The values stated in SI units
are to be regarded as standard. The values given in parentheses are
for information only.
1.5 This standard does not
purport to address all of the safety concerns, if any, associated
with its use. It is the responsibility of the user of this standard
to consult and establish appropriate safety and health practices
and determine the applicability of regulatory limitations prior to
use.
Standard Practice for Manual Sampling of
Petroleum and Petroleum Products Standard Test Method for Gasoline Diluent
in Used Gasoline Engine Oils by Distillation Standard Practice for Automatic Sampling
of Petroleum and Petroleum Products (Includes all amendments and
changes 3/24/2023). Standard Test Method for Kinematic
Viscosity of Transparent and Opaque Liquids (and Calculation of
Dynamic Viscosity) Standard Test Method for Gasoline Fuel
Dilution in Used Gasoline Engine Oils by Wide-Bore Capillary Gas
Chromatography |
Podobné normy:
Historická
1.5.2013
Historická
1.12.2013
Historická
1.1.2011
Historická
1.5.2010
Historická
1.5.2006
Historická
1.5.2008
Doporučujeme:
