ASTM D2126-09
ASTM D2842-12
ASTM D3453-12
ASTM D3489-11
ASTM D3552-12
ASTM D3574-11
Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM D3575-14
Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers
Automaticky přeložený název:
Standardní zkušební metody pro flexibilní Mobilní materiály vyrobené z polyolefinů
NORMA vydána dne 1.1.2014
Informace o normě:
Označení normy: ASTM D3575-14
Poznámka: NEPLATNÁ
Datum vydání normy: 1.1.2014
Kód zboží: NS-24102
Počet stran: 11
Přibližná hmotnost: 33 g (0.07 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Kategorie - podobné normy:
Anotace textu normy ASTM D3575-14 :
Keywords:
closed cell materials, flexible cellular, olefin polymers, ICS Number Code 83.1000
Doplňující informace
| Significance and Use | ||||||||||||||||||||||||||
|
5.1 The test procedures provide a standard method of obtaining data for research and development, quality control, acceptance and rejection under specifications, and special purposes. 5.2 The data obtained by these test methods are applicable to the material under conditions of the particular test and are not necessarily the same as obtained in other environments or use conditions. |
||||||||||||||||||||||||||
| 1. Scope | ||||||||||||||||||||||||||
|
1.1 These test methods apply to flexible closed cell materials made from olefin polymers or blends of olefin polymers with other polymers as defined in Section 1.2 These test methods cover test procedures only. Product requirements are outlined in Specification D4819. 1.3 Unless specifically stated otherwise, by agreement between the purchaser and supplier, all tests shall be performed in accordance with the test methods specified in this standard. 1.4 The values stated in SI units are to be regarded as the standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability or regulatory limitations prior to use.
|
|
Standard Test Method for Impact Attenuation of Playing Surface Systems, Other Protective Sport Systems, and Materials Used for Athletics, Recreation and Play
|
|
Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
|
|
Standard Specification for Flexible Cellular Materials—Poly (Vinyl Chloride) Foam (Closed-Cell)
|
|
Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
|
|
Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
|
|
Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
|
|
Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material
|
|
Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics (Includes all amendments and changes 7/22/2021).
|
|
Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
|
|
Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
|
|
Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus (Includes all amendments and changes 2/23/2023).
|
|
Standard Practice for Rubber´Standard Conditions for Testing
|
|
Standard Specification for Flexible Cellular Materials´Sponge or Expanded Rubber |
Podobné normy:
Historická
1.9.2009
Historická
1.10.2012
Historická
1.10.2012
Historická
1.12.2011
Historická
1.12.2012
Historická
1.12.2011
Odebírejte informace o nově vydaných normách ZDARMA:
Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.
