Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Density or Relative Density of Pure Liquid Chemicals (Withdrawn 2023)
Přeložit název
NORMA vydána dne 15.2.2018
Označení normy: ASTM D3505-18
Poznámka: NEPLATNÁ
Datum vydání normy: 15.2.2018
Kód zboží: NS-847453
Počet stran: 14
Přibližná hmotnost: 42 g (0.09 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
correction for temperature expansion, density, pure liquid chemicals, relative density,, ICS Number Code 71.060.01 (Inorganic chemicals in general),71.080.01 (Organic chemicals in general)
Significance and Use | ||||||||||||||||
5.1 This test method is suitable for setting specification, for use as an internal quality control tool, and for use in development or research work on industrial aromatic hydrocarbons and related materials. In addition to the pure liquid chemicals for which expansion functions are known, it may also be used for liquids for which temperature expansion data are not available, or for impure liquid chemicals if certain limitations are observed. Information derived from this test can be used to describe the relationship between weight and volume. |
||||||||||||||||
1. Scope | ||||||||||||||||
1.1 This test method describes a simplified procedure for the measurement of density or relative density of pure liquid chemicals for which accurate temperature expansion functions are known. It is restricted to liquids having vapor pressures not exceeding 79 993 Pascal (0.800 bar, 600 mm Hg (0.789 atm) at the equilibration temperature, and having viscosities not exceeding 15 cSt at 20°C. 1.2 Means are provided for reporting results in the following units: Density g/cm3 at 20°C Density g/mL at 20°C Relative density 20°C/4°C Relative density 15.56°C/15.56°C Note 1: This test method is based on the old definition of 1
L = 1.000028 dm3 (1 mL = 1.000028 cm3). In
1964 the General Conference on Weights and Measures withdrew this
definition of the litre and declared that the word “litre” was a
special name for the cubic decimetre, thus making 1 mL = 1
cm3 exactly.
Note 2: An alternative method for determining relative density
of pure liquid chemicals is Test Method D4052.
1.3 In determining the conformance of the test results using this method to applicable specifications, results shall be rounded off in accordance with the rounding-off method of Practice E29. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||||||||
2. Referenced Documents | ||||||||||||||||
|
Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.
Poslední aktualizace: 03.11.2024 (Počet položek: 2 209 203)
© Copyright 2024 NORMSERVIS s.r.o.