Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM D3381/D3381M-12
Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction
Automaticky přeložený název:
Standardní specifikace pro Viskozita - Graded asfaltové pojivo pro použití v Pavement Stavebnictví
NORMA vydána dne 1.12.2012
Informace o normě:
Označení normy: ASTM D3381/D3381M-12
Poznámka: NEPLATNÁ
Datum vydání normy: 1.12.2012
Kód zboží: NS-23484
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Anotace textu normy ASTM D3381/D3381M-12 :
Keywords:
asphalt cement, bitumen, pavement, viscosity, ICS Number Code 93.080.20 (Road construction materials)
Doplňující informace
| 1. Scope | ||||||
|
1.1 This specification covers asphalt cements graded by viscosity at 60°C [140°F] for use in pavement construction. Three sets of limits are offered in this specification. The purchaser shall specify the applicable table of limits. In the event the purchaser does not specify limits, Test |
Viscosity Grade |
|||||
|
AC-2.5 |
AC-5 |
AC-10 |
AC-20 |
AC-30 |
AC-40 |
|
|
Viscosity, 60°C [140°F], Pa·s |
25 ± 5 |
50 ± 10 |
100 ± 20 |
200 ± 40 |
300 ± 60 |
400 ± 80 |
|
Viscosity, 135°C [275°F], min, mm2/s |
80 |
110 |
150 |
210 |
250 |
300 |
|
Penetration, 25°C [77°F], 100 g, 5 s, min |
200 |
120 |
70 |
40 |
30 |
20 |
|
Flash point, Cleveland open cup, min,°C [°F] |
165 [325] |
175 [350] |
220 [425] |
230 [450] |
230 [450] |
230 [450] |
|
Solubility in trichloroethylene, min, % |
99.0 |
99.0 |
99.0 |
99.0 |
99.0 |
99.0 |
|
Tests on residue from thin-film oven test: |
|
|
|
|
|
|
|
Viscosity, 60°C [140°F], max, Pa·s |
125 |
250 |
500 |
1000 |
1500 |
2000 |
|
Ductility, 25°C [77°F], 5 cm/min, min, cm |
100A |
100 |
50 |
20 |
15 |
10 |
1.2 The values stated in either SI
units or inch-pound units are to be regarded separately as
standard. The values stated in each system may not be exact
equivalents; therefore, each system shall be used independently of
the other. Combining values from the two systems may result in
non-conformance with the standard.
|
Standard Test Method for Effect of Heat and Air on Asphaltic Materials (Thin-Film Oven Test) |
|
|
Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus) |
|
|
Standard Practice for Determining Asphalt Volume Correction to a Base Temperature |
|
|
Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation (Includes all amendments and changes 10/25/2024). |
|
|
Standard Test Method for Density of Semi-Solid Asphalt Binder (Pycnometer Method) |
|
|
Standard Practice for Sampling Bituminous Materials |
|
|
Standard Specification for Penetration-Graded Asphalt Cement for Use in Pavement Construction |
|
|
Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test) |
|
|
Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer |
|
|
Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens) |
|
|
Standard Test Method for Solubility of Asphalt Materials |
|
|
Standard Test Method for Ductility of Asphalt Materials |
|
|
Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide |
|
|
Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester |
|
|
Standard Test Method for Penetration of Bituminous Materials |
Doporučujeme:
Aktualizace technických norem
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
