Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Weight Loss of Solventless Varnishes
Automaticky přeložený název:
Standardní zkušební metoda pro hubnutí z rozpouštědel Laky
NORMA vydána dne 1.4.2013
Označení normy: ASTM D3377-04(2013)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.4.2013
Kód zboží: NS-23471
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
solventless varnish, varnish, weight loss, ICS Number Code 29.035.60 (Varnished fabrics)
Significance and Use | ||||||
4.1 The amount and composition of by-products produced by exposure of insulating varnishes to elevated temperatures can possibly: 4.1.1 Deteriorate other insulations in the system, 4.1.2 Cause cracking of insulation due to pressure, buildup in thick cross sections, or 4.1.3 Corrode other parts in the assembly. 4.2 Amount and rate of weight loss will possibly affect the thermal rating of a varnish. |
||||||
1. Scope | ||||||
1.1 This test method covers the determination of the percent weight loss of cured solventless electrical varnishes when exposed to elevated temperatures for prescribed periods of time. 1.2 Results of this test method are based on 6-mm (1/4-in.) thick specimens and will not be applicable to specimens appreciably thinner or thicker than 6 mm. 1.3 The values stated in SI units are to be regarded as the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
|
|
Standard Terminology Relating to Electrical Insulation
|
|
Standard Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
|
IEC 60216–2
|
Guide for the determination of thermal endurance properties of electrical insulating materials. Part 2: Choice of test criteria Available from American National Standards Institute, 11 W. 42nd St., 13th Floor, New York, NY 10036. |
Historická
1.4.2013
Historická
1.11.2012
Historická
1.4.2013
Historická
1.4.2013
Historická
15.5.2014
Historická
1.1.2012
Poslední aktualizace: 04.11.2024 (Počet položek: 2 209 323)
© Copyright 2024 NORMSERVIS s.r.o.