Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

NEPLATNÁ ASTM D3322-82(2011) 1.6.2011 náhled

Doplňující informace

ASTM D3322-82(2011)

Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal

Automaticky přeložený název:

Standardní postup zkoušení Půdy a Primer tmely Over předem vytvořeného Metal

NORMA vydána dne 1.6.2011

Jazyk
Provedení	PDF - okamžité stažení - 1 764.30 Kč Tištěné - 1 764.30 Kč
Dostupnost	SKLADEM
Cena	1764.30 Kč bez DPH
1 764.30 Kč

Informace o normě:

Označení normy: ASTM D3322-82(2011)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.6.2011
Kód zboží: NS-23280
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Nátěrové hmoty, barvy a laky

Anotace textu normy ASTM D3322-82(2011) :

Keywords:

corrosion resistance, filiform corrosion, holdout, primers, primer surfacers, sanding properties, Corrosion-resistant coatings, Filiform corrosion resistance, Intercoat adhesion, Metallic coatings, Primers, Sanding properties, Testing methods--paints/related coatings, Topcoatings, ICS Number Code 87.040 (Paints and varnishes)

Doplňující informace

Significance and Use

Primers and primer surfacers may be used over many different surfaces top coated with one or more of a variety of coatings and subjected to many kinds of wear and exposure.

The selection of the tests to be used for any given product or system must be governed by experience and by the requirement agreed upon between the producer and the user.

1. Scope

1.1 This practice covers the selection and use of procedures for testing primers and primer surfacers. The test methods included are listed in Table 1.

1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

D661-93(2019)	Standard Test Method for Evaluating Degree of Cracking of Exterior Paints
D714-02(2017)	Standard Test Method for Evaluating Degree of Blistering of Paints
C540-78	Method of Test for Image Gloss of Porcelain Enamel Surfaces (Withdrawn 1989)
D870-15(2020)	Standard Practice for Testing Water Resistance of Coatings Using Water Immersion
B117-19	Standard Practice for Operating Salt Spray (Fog) Apparatus
D522-93a(2001)	Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
D823-18(2022)	Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels
D16-24	Standard Terminology for Paint, Related Coatings, Materials, and Applications
D523-14(2018)	Standard Test Method for Specular Gloss
D609-17(2022)	Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products
D610-08(2019)	Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces
D658-91	Standard Test Method for Abrasion Resistance of Organic Coatings by Air Blast Abrasive (Withdrawn 1996)
D660-93(2019)	Standard Test Method for Evaluating Degree of Checking of Exterior Paints
141B/6321	Sanding Characteristics
D1729-22	Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
D1730-09(2020)	Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
D2246-87	Standard Method of Testing Finishes on Primed Metallic Substrates for Humidity-Thermal Cycle Cracking (Withdrawn 1992)
D2454-23	Standard Practice for Determining the Effect of Overbaking on Organic Coatings
D2803-09(2020)	Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal
D3170-12	Standard Test Method for Chipping Resistance of Coatings
D3359-23	Standard Test Methods for Rating Adhesion by Tape Test
D3456-18	Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack
D2248-01a(2018)	Standard Practice for Detergent Resistance of Organic Finishes (Includes all amendments and changes 2/13/2018).
MIL-P-46105	Primer Coating, Weld-Through, Zinc-Rich
D1732-03(2023)	Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting
D1733-	Method for Preparation of Aluminum Alloy Panels for Testing Paint, Varnish, Lacquer, and Related Products (Withdrawn 1979)
D1735-21	Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
D1737-85	Method of Test for Elongation of Attached Organic Coatings with Cylindrical Mandrel Apparatus (Withdrawn 1987)
D2091-96(2024)	Standard Test Method for Print Resistance of Lacquers
D2092-95(2001)e1	Standard Guide for Preparation of Zinc-Coated (Galvanized) Steel Surfaces for Painting (Withdrawn 2008)
D2197-16(2022)	Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
D2201-23	Standard Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products
D2244-23	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
D1731-09(2020)	Standard Practices for Preparation of Hot-Dip Aluminum Surfaces for Painting
D968-22	Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive
D1005-95(2020)	Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
D1186-01	Standard Test Methods for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to a Ferrous Base (Withdrawn 2006)
D1308-20	Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Coating Systems
D1400-00	Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Nonconductive Coatings Applied to a Nonferrous Metal Base (Withdrawn 2006)
D1474-98	Standard Test Methods for Indentation Hardness of Organic Coatings
D1640-03	Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature

Podobné normy:

ASTM D2201-99(2011)..

Historická
1.7.2011

ASTM D2205-85(2010)..

Historická
1.12.2010

ASTM D2243-95(2008)..

Historická
1.6.2008

ASTM D2245-90(2011)..

Historická
1.6.2011

ASTM D2247-11

Historická
1.2.2011

ASTM D2248-01a(2013)..

Historická
1.6.2013

Doporučujeme:

Aktualizace zákonů

Chcete mít jistotu o platnosti užívaných předpisů?
Nabízíme Vám řešení, abyste mohli používat stále platné (aktuální) legislativní předpisy.
Chcete vědět více informací? Podívejte se na tuto stránku.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.