Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM D3217-95
Standard Test Methods for Breaking Tenacity of Manufactured Textile Fibers in Loop or Knot Configurations
Automaticky přeložený název:
Standardní zkušební metody pro Breaking houževnatosti vyrobených textilních vláken ve smyčce nebo Knot Konfigurace
NORMA vydána dne 10.9.2001
Informace o normě:
Označení normy: ASTM D3217-95
Poznámka: NEPLATNÁ
Datum vydání normy: 10.9.2001
Kód zboží: NS-22886
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Anotace textu normy ASTM D3217-95 :
Keywords:
breaking strength, fibers, textile fibers, ICS Number Code 59.060.20 (Man-made fibres)
Doplňující informace
| 1. Scope | ||||||||||||||||||
|
1.1 These test methods cover the measurement of the breaking tenacity of manufactured textile fibers taken from filament yarns, staple, or tow fiber, either crimped or uncrimped, and tested in either a double loop or as a strand formed into a single overhand knot. 1.2 Methods for measuring the breaking tenacity of conditioned and wet (immersed) fibers in loop and knot form are included. 1.3 Elongation in loop or knot tests has no known significance, and is usually not recorded. 1.4 The basic distinction between the procedures described in these test methods and those included in Test Methods D2101 is the configuration of the specimen, that is, either as a double loop or in the configuration of a single overhand knot. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||||||||
| 2. Referenced Documents | ||||||||||||||||||
|
Doporučujeme:
