Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Doplňující informace

ASTM D3174-12

Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal

Automaticky přeložený název:

Standardní zkušební metoda pro Ash v analýzy vzorků uhlí a koksu z uhlí

NORMA vydána dne 1.11.2012

Jazyk
Provedení	PDF - okamžité stažení - 1 828.00 Kč Tištěné - 1 828.00 Kč
Dostupnost	SKLADEM
Cena	1828.00 Kč bez DPH
1 828.00 Kč

Informace o normě:

Označení normy: ASTM D3174-12
Poznámka: NEPLATNÁ
Datum vydání normy: 1.11.2012
Kód zboží: NS-22733
Počet stran: 6
Přibližná hmotnost: 18 g (0.04 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Tuhá paliva

Anotace textu normy ASTM D3174-12 :

Keywords:

ash, coal, coke, ICS Number Code 75.160.10 (Solid fuels)

Doplňující informace

Significance and Use

5.1 Ash, as determined by this test method, is the residue remaining after burning the coal and coke. Ash obtained differs in composition from the inorganic constituents present in the original coal. Incineration causes an expulsion of all water, the loss of carbon dioxide from carbonates, the conversion of iron pyrites into ferric oxide, and other chemical reactions. Ash, as determined by this test method, will differ in amount from ash produced in furnace operations and other firing systems because incineration conditions influence the chemistry and amount of the ash. References for correcting ash results determined by this test method to a mineral-matter-free basis are listed in Classification D388, Section 9.

1. Scope

1.1 This test method covers the determination of the inorganic residue as ash in the analysis sample of coal or coke as prepared in accordance with Practice D2013 or Practice D346. The results obtained can be applied as the ash in the proximate analysis, Practice D3172, and in the ultimate analysis, Practice D3176. For the determination of the constituents in ash, reference is made to Test Methods D3682, D4326 and D6349. Test Method D6357 should be used to prepare ash to be used for trace element analysis. See Terminology D121 for definition of ash.

1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

D346-04	Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis
D1757-03	Standard Test Method for Sulfate Sulfur in Ash from Coal and Coke (Withdrawn 2009)
D2795-95	Standard Test Methods for Analysis of Coal and Coke Ash (Withdrawn 2001)
D5016-16	Standard Test Method for Total Sulfur in Coal and Coke Combustion Residues Using a High-Temperature Tube Furnace Combustion Method with Infrared Absorption
D6349-21	Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma—Atomic Emission Spectrometry
D6357-21b	Standard Test Methods for Determination of Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry, Inductively Coupled Plasma Mass Spectrometry, and Graphite Furnace Atomic Absorption Spectrometry (Includes all amendments and changes 12/17/2021).
E691-23	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
D388-23	Standard Classification of Coals by Rank
D2013-07	Standard Practice for Preparing Coal Samples for Analysis
D3172-13(2021)e1	Standard Practice for Proximate Analysis of Coal and Coke (Includes all amendments and changes 5/19/2021).
D3173-11	Standard Test Method for Moisture in the Analysis Sample of Coal and Coke
D3176-15(2023)	Standard Practice for Ultimate Analysis of Coal and Coke
D3180-15(2023)	Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases
D3682-21	Standard Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization Processes by Atomic Spectrometry
D4326-21	Standard Test Method for Major and Minor Elements in Coal Ash By X-Ray Fluorescence
D121-15(2024)	Standard Terminology of Coal and Coke

Podobné normy:

ASTM D3997/D3997M-97..

Historická
1.9.2009

ASTM D4208-13

Historická
1.1.2013

ASTM D4239-14

Historická
1.3.2014

ASTM D4292-10

Historická
1.7.2010

ASTM D4326-13

Historická
1.9.2013

ASTM D4371-06(2012)..

Historická
1.9.2012

Doporučujeme:

Aktualizace technických norem

Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.

Chcete vědět více informací? Podívejte se na tuto stránku.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.