Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter (Includes all amendments And changes 3/27/2015).
Automaticky přeložený název:
Standard Specification pro polyetylénu (PE) plastových trubek (DR-PR) Na základě Řízená Vnější průměr
NORMA vydána dne 1.8.2014
Označení normy: ASTM D3035-14a
Poznámka: NEPLATNÁ
Datum vydání normy: 1.8.2014
Kód zboží: NS-22325
Počet stran: 9
Přibližná hmotnost: 27 g (0.06 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
DR, OD controlled, PE pipe, plastic pipe, potable water pipe, polyethylene pipe, service pipe, SDR, water pipe, water service pipe, ICS Number Code 23.040.20 (Plastic pipes)
1. Scope | ||||||||||||||||||||||||||||
1.1 This specification covers polyethylene (PE) pipe made in thermoplastic pipe dimension ratios based on outside diameter and pressure rated for water (see Appendix X1). Included are requirements for polyethylene compounds and PE plastic pipe, a system of nomenclature for PE plastic pipe, and requirements and test methods for materials, workmanship, dimensions, sustained pressure, and burst pressure. Methods of marking are also given. 1.2 All pipes produced under this specification are intended for use as the distribution and transmission of potable and non-potable water, grey water, reclaimed water, wastewater, force main and gravity municipal sewage, etc. The user should consult the manufacturer to determine whether the material being transported is compatible with polyethylene pipe and will not affect the service life beyond limits acceptable to the user. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 The following safety hazards caveat pertains
only to the test methods portion, Section 7, of this specification:
Standard Test Method for Apparent Hoop
Tensile Strength of Plastic or Reinforced Plastic Pipe (Includes
all amendments and changes 9/12/2019). Standard Test Method for Determining
Dimensions of Thermoplastic Pipe and Fittings Standard Terminology for Abbreviated
Terms Relating to Plastics (Withdrawn 2024) Standard Test Method for Resistance to
Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and
Fittings Standard Test Method for Time-to-Failure
of Plastic Pipe Under Constant Internal Pressure Standard Test Method for Melt Flow Rates
of Thermoplastics by Extrusion Plastometer (Includes all amendments
and changes 12/6/2023). Standard Practice for Conditioning
Plastics for Testing APWA Uniform Color Code APWA, 2345 Grand
Boulevard, Suite 500, Kansas City, MO 64018-2641,
http://www.apwa.net. TR-4 Listing of Hydrostatic Design Bases
(HDB), Strength Design Bases (SDB), Pressure Design Bases (PDB) and
Minimum Required Strength (MRS) Ratings for Thermoplastic Piping
Materials or Pipe .Available from Plastics Pipe Institute (PPI),
105 Decker Court, Suite 825, Irving, TX 75062,
http://www.plasticpipe.org. Standard Test Method for Obtaining
Hydrostatic Design Basis for Thermoplastic Pipe Materials or
Pressure Design Basis for Thermoplastic Pipe Products NSF/ANSI Standard No. 61 for Drinking Water System
Components--Health Effects NSF/ANSI Standard No. 14 for Plastic Piping Components and Related
Materials Available from NSF International, P.O. Box 130140, 789 N.
Dixboro Rd., Ann Arbor, MI 48113-0140, http://www.nsf.org. Standard Terminology Relating to Plastic
Piping Systems Standard Specification for Polyethylene
Plastics Pipe and Fittings Materials |
Poskytování aktuálních informací o legislativních předpisech vyhlášených ve Sbírce zákonů od roku 1945.
Aktualizace 2x v měsíci !
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 01.11.2024 (Počet položek: 2 208 817)
© Copyright 2024 NORMSERVIS s.r.o.