Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
Přeložit název
NORMA vydána dne 1.11.2016
Označení normy: ASTM D3034-16
Poznámka: NEPLATNÁ
Datum vydání normy: 1.11.2016
Kód zboží: NS-668469
Počet stran: 12
Přibližná hmotnost: 36 g (0.08 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
fittings, PVC, sewer pipe,, ICS Number Code 23.040.20 (Plastic pipes),23.040.45 (Plastic fittings)
1. Scope | ||||||||||||||||||||||||||||||
1.1 This specification covers requirements and test methods for materials, dimensions, workmanship, flattening resistance, impact resistance, pipe stiffness, extrusion quality, joining systems and a form of marking for type PSM poly(vinyl chloride) (PVC) sewer pipe and fittings. 1.2 Pipe and fittings produced to this specification should be installed in accordance with Practice D2321. 1.3 The text of this specification references notes, footnotes, and appendixes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 The following precautionary caveat pertains only
to the test methods portion, Section 8, of this specification:
Standard Practice for Conditioning
Plastics for Testing Standard Classification System and Basis
for Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds
and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds Standard Practice for Determination of
the Impact Resistance of Thermoplastic Pipe and Fittings by Means
of a Tup (Falling Weight) Standard Test Method for Determination of
External Loading Characteristics of Plastic Pipe by Parallel-Plate
Loading Standard Practice for Underground
Installation of Thermoplastic Pipe for Sewers and Other
Gravity-Flow Applications Standard Test Method for Adequacy of
Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded
Fittings by Acetone Immersion Standard Test Method for Determining
Dimensions of Thermoplastic Pipe and Fittings Standard Terminology Relating to Plastic
Piping Systems Standard Specification for Poly(Vinyl
Chloride) (PVC) Gasketed Sewer Fittings MIL-STD-129 Marking for Shipment and Storage Standard Symbols for Dimensions of
Plastic Pipe Fittings Standard Practice for the Two-Step
(Primer and Solvent Cement) Method of Joining Poly (Vinyl Chloride)
(PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Piping
Components with Tapered Sockets Standard Terminology for Abbreviated
Terms Relating to Plastics (Withdrawn 2024) Standard Specification for Joints for
Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals Standard Specification for Solvent
Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems |
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 26.04.2024 (Počet položek: 2 896 057)
© Copyright 2024 NORMSERVIS s.r.o.