Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM D2880-13a
Standard Specification for Gas Turbine Fuel Oils (Includes all amendments And changes 11/26/2013).
Automaticky přeložený název:
Standardní specifikace pro plynové turbíny topných olejů
NORMA vydána dne 1.8.2013
Informace o normě:
Označení normy: ASTM D2880-13a
Poznámka: NEPLATNÁ
Datum vydání normy: 1.8.2013
Kód zboží: NS-21814
Počet stran: 7
Přibližná hmotnost: 21 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Anotace textu normy ASTM D2880-13a :
Keywords:
fuel oils, gas turbine, petroleum and petroleum products, ICS Number Code 75.160.20 (Liquid fuels)
Doplňující informace
| 1. Scope | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
1.1 This specification covers the selection of fuels for gas turbines, excepting gas turbines used in aircraft, for the guidance of interested parties such as turbine manufacturers and the suppliers and purchasers of fuel oils. The specification sets forth the properties of fuels at the time and place of custody transfer to the user. 1.2 Three appendixes are provided for informational purposes only and do not constitute a requirement of this specification unless mutually agreed upon between the interested parties. 1.2.1 Appendix X1 describes the five grades of gas turbine fuels covered by this specification. Further, it states the significance of various test methods used in inspecting the fuels. 1.2.2 Appendix X2 discusses the sources of fuel contaminants and notes the significance of such contaminants in the operation of gas turbines and gas turbine fuel systems. The particular significance of trace metals in gas turbine fuels is noted. Upper limits of trace metals are recommended for the various grades of gas turbine fuels, but these recommended limits do not constitute a requirement of the specification unless mutually agreed upon by the interested parties. Limitations due to the use of used or recycled oil are also noted.
|
|
Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy
|
|
Standard Test Methods for Flash Point by Small Scale Closed Cup Tester (Includes all amendments and changes 7/26/2021).
|
|
Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
|
|
Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
|
40
|
CFR Part 80 Regulation of Fuels and Fuel Additives
|
26
|
CFR Part 48 Diesel Fuel Excise Tax; Dye Color and Concentration
|
|
Standard Test Method for No Flow Point and Pour Point of Petroleum Products and Liquid Fuels
|
|
Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry
|
|
Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
|
|
Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity) (Includes all amendments and changes 12/14/2021).
|
|
Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry
|
|
Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
|
|
Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Includes all amendments and changes 2/9/2024).
|
|
Standard Test Method for Flash Point by Tag Closed Cup Tester
|
|
Standard Test Method for Pour Point of Petroleum Products (Includes all amendments and changes 11/29/2022).
|
|
Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method (Includes all amendments and changes 3/14/2023).
|
|
Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
|
|
Standard Specification for Diesel Fuel (Includes all amendments and changes 12/19/2023).
|
|
Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products
|
|
Standard Test Method for Ash from Petroleum Products
|
|
Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
|
|
Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
|
|
Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
|
|
Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines
|
|
Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
|
|
Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence (Includes all amendments and changes 8/13/2019).
|
|
Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)
|
|
Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)
|
|
Standard Test Method for Pour Point of Petroleum Products (Rotational Method)
|
|
Standard Guide for Microbial Contamination in Fuels and Fuel Systems
|
|
Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)
|
|
Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
|
|
Standard Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method) (Withdrawn 2023)
|
|
Standard Specification for Fuel Oils |
Doporučujeme:
