Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement
Automaticky přeložený název:
Standard Specification pro Spojky pro IPS PVC potrubí pomocí lepením
NORMA vydána dne 15.11.2014
Označení normy: ASTM D2672-14
Poznámka: NEPLATNÁ
Datum vydání normy: 15.11.2014
Kód zboží: NS-21115
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
ICS Number Code 23.040.20 (Plastic pipes)
1. Scope | ||||||||||||||||||||||||||
1.1 This specification covers the socket produced for solvent cement joints on both pressure and non-pressure IPS pipe. It also covers the testing of the joints on both pressure and non-pressure pipe, and includes requirements for socket dimensions, burst pressure, and joint tightness tests of the solvent cemented joints. The tests described are not intended for routine quality control, but rather to evaluate the performance characteristics of the joint. Note 1: On dual marked Schedule 40 DWV and potable water pipe,
the socket bells must conform to the dimensional and physical
requirements for pressure socket bells.
1.2 The text of this specification references notes, footnotes, and appendixes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. Note 2: Changes in ground, water, or air temperature will
produce expansion or contraction forces in PVC piping, and these
will result in longitudinal shear stresses in the solvent cement
joints. These stresses must be considered in the design and
operation of the system.
Note 3: See Practice D618 for information relating to this
specification.
1.4 The following safety hazards caveat pertains
only to the test method portion, Section 10, of this specification.
Standard Specification for Smooth-Wall
Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground
Installation Standard Terminology Relating to Plastic
Piping Systems Standard Specification for Primers for
Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic
Pipe and Fittings Standard Practice for Xenon-Arc Exposure
of Plastics Intended for Outdoor Applications Standard Specification for Poly(Vinyl
Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and
Fittings Standard Specification for Poly(Vinyl
Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120 (Includes
all amendments and changes 10/8/2021). Standard No. 14 for Plastic Piping Components and Related
Materials Available from NSF International, P.O. Box 130140, 789 N.
Dixboro Rd., Ann Arbor, MI 48113-0140, http://www.nsf.org. Standard Test Method for Resistance to
Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and
Fittings Standard Practice for Conditioning
Plastics for Testing Standard Specification for Poly(Vinyl
Chloride) (PVC) Pressure-Rated Pipe (SDR Series) Standard Test Method for Determining
Dimensions of Thermoplastic Pipe and Fittings Standard Practice for the Two-Step
(Primer and Solvent Cement) Method of Joining Poly (Vinyl Chloride)
(PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Piping
Components with Tapered Sockets Standard Terminology for Abbreviated
Terms Relating to Plastics (Withdrawn 2024) |
Poslední aktualizace: 26.04.2024 (Počet položek: 2 896 057)
© Copyright 2024 NORMSERVIS s.r.o.