Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Classification of Industrial Fluid Lubricants by Viscosity System
Automaticky přeložený název:
Standardní klasifikace průmyslových tekutin maziv viskozitou System
NORMA vydána dne 1.5.2013
Označení normy: ASTM D2422-97(2013)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.5.2013
Kód zboží: NS-20331
Počet stran: 2
Přibližná hmotnost: 6 g (0.01 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
classification, lubricant, viscosity, ICS Number Code 75.100 (Lubricants, industrial oils and related products)
Significance and Use | ||||||
3.1 This classification establishes a series of definite viscosity levels so that lubricant suppliers, lubricant users, and equipment designers will have a uniform and common basis for designating, specifying, or selecting the viscosity of industrial fluid lubricants. 3.2 This classification is used to eliminate unjustified intermediate viscosities, thereby reducing the total number of viscosity grades used in the lubrication of industrial equipment. 3.3 This system provides a suitable number of viscosity grades, a uniform reference temperature, a uniform viscosity tolerance, and a nomenclature system for identifying the viscosity characteristics of each grade. 3.4 This system implies no evaluation of lubricant quality and applies to no property of a fluid other than its viscosity at the reference temperature. It does not apply to those lubricants used primarily with automotive equipment and identified with an SAE number. |
||||||
1. Scope | ||||||
1.1 This classification is applicable to all petroleum-base fluid lubricants and to those nonpetroleum materials which may be readily blended to produce fluid lubricants of a desired viscosity, that is, lubricants for bearings, gears, compressor cylinders, hydraulic fluids, etc. 1.2 This classification is applicable to fluids ranging in kinematic viscosity from 2 to 3200 cSt (mm2/s) as measured at a reference temperature of 40°C. In the category of petroleum-base fluids, this covers the range from kerosine to heavy cylinder oils. 1.3 Fluids of either lesser or greater viscosity than the range described in 1.2 are, at present, seldom used as industrial lubricants. Should industrial practices change, then this system, based on a mathematical series of numbers, may be extended to retain its orderly progression. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. |
||||||
2. Referenced Documents | ||||||
|
Historická
1.6.2009
Historická
1.12.2011
Historická
1.5.2011
Historická
1.7.2010
Historická
1.5.2013
Historická
1.5.2014
Poslední aktualizace: 22.11.2024 (Počet položek: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.