Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Doplňující informace

ASTM D2000-04

Standard Classification System for Rubber Products in Automotive Applications

Automaticky přeložený název:

Standardní systém klasifikace pryžových výrobků v automobilovém průmyslu

NORMA vydána dne 1.12.2004

Jazyk
Provedení	Online zabezpečené PDF - 2 613.60 Kč Tištěné - 2 613.60 Kč
Dostupnost	SKLADEM
Cena	2613.60 Kč bez DPH
2 613.60 Kč

Informace o normě:

Označení normy: ASTM D2000-04
Poznámka: NEPLATNÁ
Datum vydání normy: 1.12.2004
Kód zboží: NS-18993
Počet stran: 29
Přibližná hmotnost: 87 g (0.19 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Anotace textu normy ASTM D2000-04 :

Keywords:

rubber, automotive applications, classification, rubber products, ICS Number Code 83.060 (Rubber), 83.160.01 (Tyres in general)

Doplňující informace

1. Scope

1.1 This classification system tabulates the properties of vulcanized rubber materials (natural rubber, reclaimed rubber, synthetic rubbers, alone or in combination) that are intended for, but not limited to, use in rubber products for automotive applications. Note 1This classification system may serve many of the needs of other industries in much the same manner as SAE numbered steels. It must be remembered, however, that this system is subject to revision when required by automotive needs. It is recommended that the latest revision always be used.

1.2 This classification system is based on the premise that the properties of all rubber products can be arranged into characteristic material designations. These designations are determined by types, based on resistance to heat aging, and classes, based on resistance to swelling in oil. Basic levels are thus established which, together with values describing additional requirements, permit complete description of the quality of all elastomeric materials.

1.3 In all cases where the provisions of this classification system would conflict with those of the detailed specifications for a particular product, the latter shall take precedence. Note 2When the rubber product is to be used for purposes where the requirements are too specific to be completely prescribed by this classification system, it is necessary for the purchaser to consult the supplier in advance, to establish the appropriate properties, test methods, and specification test limits.

1.4 The values stated in SI units are to be regarded as the standard.

2. Referenced Documents

D1053-92a(2024)	Standard Test Methods for Rubber Property—Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics (Includes all amendments and changes 6/24/2024).
D865-11(2025)	Standard Test Method for Rubber—Deterioration by Heating in Air (Test Tube Enclosure)
D624-00(2020)	Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
D575-91(2024)	Standard Test Methods for Rubber Properties in Compression
D573-04(2025)	Standard Test Method for Rubber—Deterioration in an Air Oven
D471-16a(2021)	Standard Test Method for Rubber Property—Effect of Liquids (Includes all amendments and changes 6/25/2021).
D430-06(2025)	Standard Test Methods for Rubber Deterioration—Dynamic Fatigue
D429-14(2023)	Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates
D412-16(2021)	Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
D2137-11(2025)	Standard Test Methods for Rubber Property—Brittleness Point of Flexible Polymers and Coated Fabrics
D3183-10(2024)	Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products
D5964-16(2021)	Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for ASTM No. 1, ASTM No. 2, ASTM No. 3 Oils, and IRM 905 formerly ASTM No. 5 Oil
D2240-15(2021)	Standard Test Method for Rubber Property—Durometer Hardness
D945-22	Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
D925-14(2025)	Standard Test Methods for Rubber Property—Staining of Surfaces (Contact, Migration, and Diffusion)
D1149-18(2025)	Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
D1171-18(2025)	Standard Test Method for Rubber Deterioration—Surface Ozone Cracking Outdoors (Triangular Specimens)
D1329-16(2021)	Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test)
D1349-14(2024)	Standard Practice for Rubber—Standard Conditions for Testing
D1418-22	Standard Practice for Rubber and Rubber Latices—Nomenclature
D395-18(2025)	Standard Test Methods for Rubber Property—Compression Set

Doporučujeme:

Aktualizace technických norem

Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.

Chcete vědět více informací? Podívejte se na tuto stránku.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.