Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM D1933-03(2017)
Standard Specification for Nitrogen Gas as an Electrical Insulating Material
Přeložit název
NORMA vydána dne 1.1.2017
Informace o normě:
Označení normy: ASTM D1933-03(2017)
Datum vydání normy: 1.1.2017
Kód zboží: NS-674325
Počet stran: 2
Přibližná hmotnost: 6 g (0.01 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Kategorie - podobné normy:
Anotace textu normy ASTM D1933-03(2017) :
This specification covers three types of nitrogen gas used as an electrical insulating material in electrical equipment: Type I, obtained from the air by liquefaction processes and dried; Type II, obtained from the air by liquefaction processes, deoxidized with hydrogen over a platinum catalyst, and dried; and Type III, obtained from the air by liquefaction processes and if necessary deoxidized by suitable means. Materials shall be tested and the individual grades shall conform to specified values of % volume of nitrogen and rare gases, hydrogen, and oxygen; and dew point.
Keywords:
electrical insulating material, nitrogen gas, oxygen gas,, ICS Number Code 29.040.20 (Insulating gases)
Doplňující informace
| 1. Scope | ||||||
|
1.1 This specification covers three types of nitrogen used as an electrical insulating material in electrical equipment: 1.1.1 Type I, obtained from the air by liquefaction processes and dried, 1.1.2 Type II, obtained from the air by liquefaction processes, deoxidized with hydrogen over a platinum catalyst, and dried, and 1.1.3 Type III, obtained from the air by liquefaction processes and if necessary deoxidized by suitable means. Note 1: The fact that metal containers are filled with
materials meeting this specification does not exclude the
possibility that the materials might become contaminated with
unlisted impurities.
1.2 The following safety hazards caveat pertains
only to the test method portion, Section 5, of this specification:
Standard Practice for Packed Column Gas
Chromatography Standard Test Methods for Water Vapor
Content of Electrical Insulating Gases by Measurement of Dew
Point Standard Guide for Probability Sampling
of Materials |
Doporučujeme:
