Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Refractive Index of Viscous Materials
Přeložit název
NORMA vydána dne 1.5.2019
Označení normy: ASTM D1747-09(2019)
Datum vydání normy: 1.5.2019
Kód zboží: NS-951977
Počet stran: 6
Přibližná hmotnost: 18 g (0.04 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
oils, purity, refractive index, refractometer, wax,, ICS Number Code 17.180.30 (Optical measuring instruments), 75.080 (Petroleum products in general)
Significance and Use | ||||||||||||
5.1 Refractive index is a fundamental physical property that can be used in conjunction with other properties to characterize pure hydrocarbons and their mixtures. 5.2 The use of refractive index in correlative methods for the determination of the gross composition of viscous oils and waxes often requires its measurement at elevated temperatures. |
||||||||||||
1. Scope | ||||||||||||
1.1 This test method covers the measurement of refractive indexes, accurate to two units in the fourth decimal place, of transparent and light-colored viscous hydrocarbon liquids and melted solids that have refractive indexes in the range between 1.33 and 1.60, and at temperatures from 80 °C to 100 °C. Temperatures lower than 80 °C can be used provided that the melting point of the sample is at least 10 °C below the test temperature. 1.2 This test method is not applicable, within the accuracy stated, to liquids having colors darker than ASTM Color No. 4, ASTM color as determined by Test Method D1500, to liquids which smoke or vaporize readily at the test temperature, or to solids melting within 10 °C of the test temperature. Note 1: The instrument can be successfully used for refractive
indices above 1.60; but since certified liquid standards for ranges
above 1.60 are not yet available, the accuracy of measurement under
these conditions has not been evaluated.
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||||
2. Referenced Documents | ||||||||||||
|
Poslední aktualizace: 01.11.2024 (Počet položek: 2 208 817)
© Copyright 2024 NORMSERVIS s.r.o.