Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Rubber Property—Abrasion Resistance (Footwear Abrader)
Automaticky přeložený název:
Standardní zkušební metoda pro Rubber majetku & ndash; Odolnost proti oděru (obuv Abrader)
NORMA vydána dne 1.5.2012
Označení normy: ASTM D1630-06(2012)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.5.2012
Kód zboží: NS-17888
Počet stran: 5
Přibližná hmotnost: 15 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
abrader, abraser, abrasion, abrasion index, abrasion resistance, abrasive, break-in compound, footwear, footwear abrader, National Bureau of Standards, NBS abrader, reference compound, RMA, Footwear--soles/heels/related materials, Footwear abrader, Garnet paper, NBS abrader, Rubber abrasion, Sandpaper, Abrading, Abrasion resistance--rubber, ICS Number Code 83.060 (Rubber)
Significance and Use | ||||||
It is recognized that when comparing different types of rubber materials, the service performance may not correlate to the results of this predictive test. This test method should not be used as a measure of abrasion resistance for compositions that differ markedly from the standard reference compound. Misleading results, for example, are obtained from polyurethane compositions when compared with the standard reference compound. Some specimens may bounce (chatter) against the abrasive paper, producing inaccurate results. These should be interpreted with care and the condition reported. If test results are inconsistent, the specimens should be cut, after the test is run, and inspected for voids. If any voids are present, the results should be disregarded and the test repeated using test specimens that are free from voids. |
||||||
1. Scope | ||||||
1.1 This test method covers the determination of the resistance to abrasion of vulcanized rubber, or other rubber materials that are similar to the standard reference compound, used for the soles and heels of footwear. It is not recommended for materials less than 2.5 mm (0.1 in.) in thickness. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||
2. Referenced Documents | ||||||
|
Historická
1.11.2013
Historická
1.6.2010
Historická
1.5.2009
Historická
1.7.2009
Historická
1.5.2010
Historická
1.5.2010
Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.
Poslední aktualizace: 22.11.2024 (Počet položek: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.