Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Carbon Black Content in Olefin Plastics
Automaticky přeložený název:
Standardní zkušební metoda pro sazí v olefinů, plastů
NORMA vydána dne 1.8.2014
Označení normy: ASTM D1603-14
Poznámka: NEPLATNÁ
Datum vydání normy: 1.8.2014
Kód zboží: NS-17822
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
carbon black, content, gravimetric, plastics, polyolefins, ICS Number Code 83.080.10 (Thermosetting materials)
Significance and Use | ||||||||||
4.1 The information provided by this test method is useful for manufacturing quality control, technical service, and research purposes; and is required by various material specifications and for the calculation of optical absorptivity. 4.2 Test Method D4218 is available for determining the carbon black content of polyethylene compounds if so desired. |
||||||||||
1. Scope | ||||||||||
1.1 This test method covers the determination of the carbon black content in polyethylene, polypropylene, and polybutylene plastics. Its use with acrylic or other polar monomer modifications which might affect the accuracy is not recommended. Determinations of carbon black content are made gravimetrically after pyrolysis of the sample under nitrogen. This test method is not applicable to compositions that contain nonvolatile pigments or fillers other than carbon black. 1.1.1 This test method is not applicable to materials containing brominated flame retardant additives at the end. 1.2 The values stated in SI units are to be regarded as standard. The values in parentheses are given for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 1: This standard and ISO 6964-1986(E) address the same
subject matter, but differ in technical content.
|
||||||||||
2. Referenced Documents | ||||||||||
|
Historická
15.10.2011
Historická
1.8.2014
Historická
1.10.2013
Historická
1.10.2012
Historická
1.10.2012
Historická
1.12.2009
Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.
Poslední aktualizace: 05.05.2024 (Počet položek: 2 897 047)
© Copyright 2024 NORMSERVIS s.r.o.