Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
Automaticky přeložený název:
Standardní zkušební metoda pro Hustota Liquid Coatings, inkousty a související produkty
NORMA vydána dne 1.11.2013
Označení normy: ASTM D1475-13
Poznámka: NEPLATNÁ
Datum vydání normy: 1.11.2013
Kód zboží: NS-17376
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
density, pycnometer, weight per gallon, weight per gallon cup, ICS Number Code 87.040 (Paints and varnishes)
Significance and Use | ||||||||||
5.1 Density is weight per unit volume. It is a key property in the identification, characterization, and quality control of a wide range of materials. Density measurements in terms of weight per gallon are commonly used to check paint quality. If the density is not within specification, there is a good chance that there was a mischarge or other serious problem. 5.2 This test method is suitable for the determination of density of paint and related products and components when in liquid form. It is particularly applicable when the fluid has too high a viscosity or when a component is too volatile for a density balance determination. 5.3 This test method provides for the maximum accuracy required for hiding power determinations. It is equally suitable for work in which less accuracy is required, by ignoring the directions for recalibration and consideration of temperature differentials, and using as the container a “weight-per-gallon” cup. 5.4 Automatic equipment for measuring density is available (see Test Method D4052) from several manufacturers. Such apparatus has been used for resins and latices as well as for oils and solvents. Before such equipment is used for a given product, results must be checked very carefully. Particularly with paints, inks, and resins, there are possibilities of gumming, fouling, and other interferences with operation. |
||||||||||
1. Scope | ||||||||||
1.1 This test method covers the measurement of density of paints, inks, varnishes, lacquers, and components thereof, other than pigments, when in fluid form. 1.2 For higher precision when working with nonpigmented materials (drying oils, varnishes, resins and related materials), Test Method D1963 can be used to determine specific gravity and, thence, density. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3.1 Exception—The values for density are to be stated in inch-pound units. 1.4 This standard does not
purport to address all of the safety concerns, if any, associated
with its use. It is the responsibility of the user of this standard
to establish appropriate safety and health practices and determine
the applicability of regulatory limitations prior to use.
Standard Specification for Reagent
Water Standard Test Method for Density,
Relative Density, and API Gravity of Liquids by Digital Density
Meter Standard Practice for Determining the
Precision of ASTM Methods for Analysis and Testing of Industrial
and Specialty Chemicals (Withdrawn 2009) Standard Practice for Conducting an
Interlaboratory Study to Determine the Precision of a Test
Method Standard Test Method for Specific Gravity
of Drying Oils, Varnishes, Resins, and Related Materials at 25/25°C
(Withdrawn 2004) |
Historická
1.6.2007
Historická
1.6.2007
Historická
1.11.2013
Historická
1.6.2010
Historická
1.2.2008
Historická
1.6.2009
Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.
Poslední aktualizace: 22.11.2024 (Počet položek: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.