Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels (Withdrawn 2019)
Automaticky přeložený název:
Standardní zkušební metoda pro odhad čistého spalného tepla paliv letectví
NORMA vydána dne 1.5.2013
Označení normy: ASTM D1405/D1405M-08(2013)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.5.2013
Kód zboží: NS-17187
Počet stran: 7
Přibližná hmotnost: 21 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
aviation fuel, gross heat of combustion, heat energy, heat of combustion, heating tests, net heat of combustion, ICS Number Code 75.160.20 (Liquid fuels)
Significance and Use | |
4.1 This test method is intended for use as a guide in cases where an experimental determination of heat of combustion is not available and cannot be made conveniently, and where an estimate is considered satisfactory. It is not intended as a substitute for experimental measurements of heat of combustion. 1.1 This test method covers the
estimation of the net heat of combustion at constant pressure in SI
units (megajoules per kilogram) or inch-pound units [Btu per
pound].
1.2 This test method is purely empirical and is applicable only to liquid hydrocarbon fuels derived by normal refining processes from conventional crude oil, which conform to the requirements of specifications for aviation gasolines, or aircraft turbine and jet engine fuels of limited boiling ranges and compositions as described in Note 1. Fuel |
Specification |
Aviation gasoline fuels: |
Specification D910 |
Grades 80, 82, 100/130, and 115/145 |
Specification D6227 |
|
DEF STAN 91–90 |
|
NATO Code F-18 |
|
|
Aviation turbine fuels: |
MIL-DTL-5624 |
JP-4,Avtag/FSII |
DEF STAN 91–88 |
|
NATO Code F-40 |
|
|
JP-5,Avcat/FSII |
MIL-DTL-5624 |
|
DEF STAN 91–86 |
|
NATO Code F-44 |
|
|
Jet A, Jet A-1, Avtur |
Specification D1655 |
|
DEF STAN 91–91 |
|
NATO Code F-35 |
1.3 This test method is not applicable to pure hydrocarbons. It is not intended as a substitute for experimental measurements of heat of combustion.
1.4 The heat of combustion may also be determined in SI units by Test Method D4529. Test Method D4529 requires calculation of a single equation for all aviation fuels with a precision equivalent to that of this test method.
1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels |
|
Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method) |
|
Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence (Includes all amendments and changes 8/13/2019). |
|
Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component |
|
MIL-DTL-5624 |
Aviation Turbine Fuels, Grades JP-4, JP-5, and JP-5/JP-8 ST |
MIL-T-83133 |
Aviation Turbine Fuel, Grade JP-8 |
Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry |
|
Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
|
Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry |
|
Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry |
|
Standard Specification for Aviation Turbine Fuels (Includes all amendments and changes 10/11/2023). |
|
Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method (Includes all amendments and changes 3/14/2023). |
|
Standard Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method) (Withdrawn 2023) |
|
Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer/Method) |
|
Standard Guide for the Use of the Joint API and ASTM Adjunct for Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils: API MPMS Chapter 11.1 (Includes all amendments and changes 5/15/2020). |
|
Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter |
|
Test Method for Density and Relative Density (Specific Gravity) of Liquids by Lipkin Bicapillary Pycnometer (Withdrawn 1993) |
|
Standard Specification for Leaded Aviation Gasolines |
|
Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents |
|
Standard Test Method for Sulfur in Petroleum Products (Lamp Method) |
|
Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer |
Historická
15.12.2012
Historická
1.1.2012
Historická
1.5.2014
Historická
1.12.2013
Historická
1.5.2013
Historická
1.12.2012
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 04.11.2024 (Počet položek: 2 209 323)
© Copyright 2024 NORMSERVIS s.r.o.