Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer (Withdrawn 2020)
Automaticky přeložený název:
Standardní zkušební metoda pro Jemnost Grind tiskařských barev Do NPIRI Grindometer
NORMA vydána dne 1.6.2011
Označení normy: ASTM D1316-06(2011)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.6.2011
Kód zboží: NS-16958
Počet stran: 7
Přibližná hmotnost: 21 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
A1 Scraper, Automatic Drawdown Machine (ADM-1), degree of dispersion, grind gauge, NPIRI Grindometer, pigment dispersions, printing inks, Dispersion, Fineness of grind (dispersion), Grinding materials/operations, NPIRI grindometer, Pigment dispersion (paints/related coatings/materials), Pigments (general properties), Printing inks/vehicles, ICS Number Code 87.080 (Inks. Printing inks)
Significance and Use | ||||||||||||
Oversize particles in a printing ink may damage a printing plate, plug a cell, clog a nozzle and adversely affect the appearance of printed ink films. Fineness of grind measurements are useful for deciding when to stop the dispersion process and for determining if the test material meets specifications as agreed upon between the supplier and the customer. |
||||||||||||
1. Scope | ||||||||||||
1.1 This test method describes the procedure for determining the fineness of grind of printing inks using a NPIRI Grindometer. It evaluates the size of the largest particles in a finished dispersion but not average particle size or concentration of sizes. 1.2 This test method covers both manual and automatic drawdowns using an A1 scraper. 1.3 This test method is applicable to any dispersion that is fine enough to fall within the 0–25 μm range of the specified grind gauge. With a minor variation in procedure, it is applicable to both paste (nonvolatile) and liquid (volatile) inks. Note 1—The 0–25 μm gauge specified in this test method is similar in principle to the 0–100 μm Hegman gauge described in Test Method D1210 and the various gauges described in ISO 1524:2000. Sieve analysis for concentration of particles above 45 μm is covered in Test Method D2067. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||
2. Referenced Documents | ||||||||||||
|
Historická
1.7.2008
Historická
1.10.2011
Historická
1.10.2010
Historická
1.10.2011
Historická
1.10.2011
Historická
1.5.2013
Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.
Poslední aktualizace: 21.11.2024 (Počet položek: 2 206 478)
© Copyright 2024 NORMSERVIS s.r.o.