Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM D1201-13(2022)e1
Standard Specification for Thermosetting Polyester Molding Compounds (Includes all amendments and changes 2/25/2022).
Přeložit název
NORMA vydána dne 1.1.2022
Informace o normě:
Označení normy: ASTM D1201-13(2022)e1
Datum vydání normy: 1.1.2022
Kód zboží: NS-1050716
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Kategorie - podobné normy:
Anotace textu normy ASTM D1201-13(2022)e1 :
This specification deals with the classification, requirements, and testing of compression molding, thermosetting, unsaturated polyester molding compounds. Covered here are the following types of polyester molding compounds: Type 1 - general-purpose granular materials with mineral fillers; Type 2 - general-purpose granular materials with mineral and cellulosic fillers, and having improved mechanical strength; Type 3 - general-purpose putty-type materials with mineral fillers; Type 4 - putty-type materials with mineral fillers and having superior electrical properties; Type 5 - high-impact glass-fiber filled materials in mat form, and has good electrical properties; and Type 6 - high-impact glass-fiber filled materials in putty form. Sampled specimens shall be tested and conform accordingly to material requirements such as specific gravity, flexural strength, modulus of elasticity in flexure, Izod impact resistance, arc resistance, and water absorption.
Keywords:
molding compounds (thermosetting), polyester, unsaturated polyester,, ICS Number Code 83.140.99 (Other rubber and plastic products)
Doplňující informace
| 1. Scope | ||||||||||||||||
|
1.1?This specification covers compression molding, thermosetting, unsaturated polyester molding compounds as further defined in 3.1. 1.2?The values stated in SI units are to be regarded as the standard. Note 1:?The properties included in this specification are
those required to identify the types of molding compounds covered.
There may be other requirements necessary to identify particular
characteristics. These will be added to the specification as their
inclusion becomes generally desirable and the necessary test data
and methods become available.
Note 2:?ISO 36721: 1979(E) is similar but not equivalent to
this specification. Product classification and characterization are
not equivalent.
1.3?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||||||||
| 2. Referenced Documents | ||||||||||||||||
|
Doporučujeme:
Aktualizace zákonů
Chcete mít jistotu o platnosti užívaných předpisů?
Nabízíme Vám řešení, abyste mohli používat stále platné (aktuální) legislativní předpisy.
Chcete vědět více informací? Podívejte se na tuto stránku.
