Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Methods for Amount of Material in Soils Finer than No. 200 (75-µm) Sieve
Automaticky přeložený název:
Standardní zkušební metody pro množství materiálu v půdách jemnější než No. 200 ( 75 um ) Síto
NORMA vydána dne 15.11.2006
Označení normy: ASTM D1140-00(2006)
Poznámka: NEPLATNÁ
Datum vydání normy: 15.11.2006
Kód zboží: NS-16435
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
fines, particle sizes, sieve analysis, washing, ICS Number Code 19.120 (Particle size analysis. Sieving)
Significance and Use | ||||||||||||||||||||||||||||||||||
Material finer than the 75-μm (No. 200) sieve can be separated from larger particles much more efficiently and completely by wet sieving than with dry sieving. Therefore, when accurate determinations of material finer than 75-μm sieve in soil are desired, this test method is used on the test specimen prior to dry sieving. Usually the additional amount of material finer than 75-μm sieve obtained in the dry sieving process is a small amount. If it is large, the efficiency of the washing operation should be checked, as it could be an indication of degradation of the soil. With some soils, particularly clayey soils, in order to keep the finer material from adhering to the larger particles, it will be necessary to soak the soil prior to washing it through the sieve. A deflocculating agent (dispersing agent) should be added to the soil when it is soaked. Note 1—The quality of the result produced by this standard is dependent on the competence of the personnel performing it, and the suitability of the equipment and facilities used. Agencies that meet the criteria of Practice D 3740 are generally considered capable of competent and objective testing/sampling/inspection/etc. Users of this standard are cautioned that compliance with Practice D 3740 does not in itself assure reliable results. Reliable results depend on many factors; Practice D 3740 provides a means of evaluating some of those factors. |
||||||||||||||||||||||||||||||||||
1. Scope | ||||||||||||||||||||||||||||||||||
1.1 These test methods cover determination of the amount of material finer than a 75-m (No. 200) sieve by washing. 1.2 Two methods for determining the amount of material finer than the No. 200 sieve are provided. The method to be used shall be specified by the requesting authority. If no method is specified, the choice should be based on the guidance given in 4.2 and 7.3 1.2.1 Method A-Test specimen is not dispersed prior to wash sieving. 1.2.2 Method B-Test specimen is dispersed by soaking in water containing a deflocculating agent prior to wash sieving. 1.3 The values stated in SI units are to be regarded as the standard. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||||||||||||
|
Poslední aktualizace: 01.11.2024 (Počet položek: 2 208 817)
© Copyright 2024 NORMSERVIS s.r.o.