Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Specification for Boron-based Neutron Absorbing Material Systems for Use in Nuclear Fuel Storage Racks in Pool Environment (Includes all amendments and changes 7/28/2020).
Přeložit název
NORMA vydána dne 1.7.2020
Označení normy: ASTM C992-20a
Datum vydání normy: 1.7.2020
Kód zboží: NS-1000108
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
This specification defines essential criteria for all material combinations in boron-based neutron-absorbing material systems used for nuclear spent fuel storage racks in nuclear light water reactors, spent-fuel assemblies, or disassembled components. The boron-based neutron absorbing materials normally consist of metallic boron or a boron-containing boron compound supported by a matrix of aluminum, steel, or other materials. Material systems covered in this specification should always be capable of maintaining a B10 areal density that can support the required subcriticality depending on the design specification for service life.
Keywords:
boron, spent fuel, storage rack,, ICS Number Code 27.120.01 (Nuclear energy in general)
1. Scope | ||||||||||||||||||
1.1 This specification defines criteria for boron-based neutron absorbing material systems used in racks in a pool environment for storage of nuclear light water reactor (LWR) spent-fuel assemblies or disassembled components to maintain sub-criticality in the storage rack system. 1.2 Boron-based neutron absorbing material systems normally consist of metallic boron or a chemical compound containing boron (for example, boron carbide, B1.3 In a boron-based absorber, neutron absorption occurs primarily by the boron-10 isotope that is present in natural boron to the extent of 18.3 ± 0.2 % by weight (depending upon the geological origin of the boron). Boron enriched in boron-10 could also be used. 1.4 The materials systems described herein shall be functional (that is, always be capable to maintain a boron-10 areal density such that subcriticality is maintained depending on the design specification for the service life in the operating environment of a nuclear spent fuel pool). 1.5 Observance of this specification does not relieve the user of the obligation to conform to all applicable international, national, and local regulations. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||
|
Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.
Poslední aktualizace: 23.12.2024 (Počet položek: 2 217 157)
© Copyright 2024 NORMSERVIS s.r.o.