ASTM C1047-14a
ASTM C1063-14c
ASTM C1064/C1064M-12..
ASTM C109/C109M-13..
ASTM C1090-10
ASTM C11-13
Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM C840-13
Standard Specification for Application and Finishing of Gypsum Board
Automaticky přeložený název:
Standardní specifikace pro aplikace a dokončovací sádrokartonu
NORMA vydána dne 1.12.2013
Informace o normě:
Označení normy: ASTM C840-13
Poznámka: NEPLATNÁ
Datum vydání normy: 1.12.2013
Kód zboží: NS-15268
Počet stran: 18
Přibližná hmotnost: 54 g (0.12 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Kategorie - podobné normy:
Anotace textu normy ASTM C840-13 :
Keywords:
ceiling, gypsum, wallboard, walls, ICS Number Code 91.100.10 (Cement. Gypsum. Lime. Mortar)
Doplňující informace
| 1. Scope | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
1.1 This specification covers the minimum requirements for the methods of application and finishing of gypsum board, including related items and accessories. 1.2 Details of construction for a specific assembly to achieve the required fire resistance shall be obtained from reports of fire-resistance tests, engineering evaluations, or listings from recognized fire testing laboratories. 1.2.1 Where this specification is more stringent (size or thickness of framing: size and spacing of fasteners) than the fire-rated construction, this specification shall govern. 1.3 Where sound control is required for a gypsum board assembly, details of construction shall be in accordance with reports of acoustical tests of assemblies that have met the required acoustical values. 1.4 Unheated spaces above gypsum board ceilings shall be properly ventilated (see Appendix X2). 1.5 The various application systems
are located in the following sections:
1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.7 The text of this specification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification. 1.8 The following precautionary
caveat pertains only to Sections 1.8.1 For specific precautionary
statements, see
Standard Specification for Steel
Self-Piercing Tapping Screws for Application of Gypsum Panel
Products or Metal Plaster Bases to Wood Studs or Steel Studs Standard Specification for Installation
of Load Bearing (Transverse and Axial) Steel Studs and Related
Accessories Standard Specification for Gypsum
Board Standard Specification for Nails for the
Application of Gypsum Board Standard Specification for Adhesives for
Fastening Gypsum Wallboard to Wood Framing Standard Specification for Nonstructural
Steel Framing Members PS20 American Softwood Lumber Standard
Available from U.S. Government Printing Office, Washington, DC
20402. Standard Specification for Steel Drill
Screws for the Application of Gypsum Panel Products or Metal
Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in.
(2.84 mm) in Thickness Standard Terminology Relating to Gypsum
and Related Building Materials and Systems Standard Specification for Joint Compound
and Joint Tape for Finishing Gypsum Board Standard Specification for Installation
of Steel Framing Members to Receive Screw-Attached Gypsum Panel
Products Standard Specification for Accessories
for Gypsum Wallboard and Gypsum Veneer Base Standard Guide for Installation of Gypsum
Products in Concealed Radiant Ceiling Heating Systems Standard Specification for Elastomeric
Joint Sealants |
Podobné normy:
Historická
1.6.2014
Historická
1.6.2014
Historická
1.12.2012
Historická
1.10.2013
Historická
15.6.2010
Historická
1.3.2013
Doporučujeme:
