Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Aluminum Oxide and AluminumOxide-Boron Carbide Composite Pellets
Přeložit název
NORMA vydána dne 1.2.2019
Označení normy: ASTM C809-19
Poznámka: NEPLATNÁ
Datum vydání normy: 1.2.2019
Kód zboží: NS-939938
Počet stran: 7
Přibližná hmotnost: 21 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
alumina/boron carbide pellets, alumina pellets, Al2O3, Al2O3/B4C, amperometric microtitration, analytical methods, bromide, chloride, DCArc OES, fluoride, ICP MS, ICP OES, iodide, ion-selective electrode, isotopic composition, mannitoboric acid procedure, mass spectrometry, metallic impurities, pyrohydrolysis, TIMS, titrimetry, total boron,, ICS Number Code 27.120.30 (Fissile materials and nuclear fuel technology)
Significance and Use | |||||||||||||||||||
4.1 Aluminum oxide pellets are used in a reactor core as filler or spacers within fuel, burnable poison, or control rods. In order to be suitable for this purpose, the material must meet certain criteria for impurity content. These test methods are designed to show whether or not a given material meets the specifications for these items as described in Specification C785. 4.1.1 Impurity content is determined to ensure that the maximum concentration limit of certain impurity elements is not exceeded. 4.2 Aluminum oxide-boron carbide composite pellets are used in a reactor core as a component in neutron absorber rods. In order to be suitable for this purpose, the material must meet certain criteria for boron content, isotopic composition, and impurity content as described in Specification C784. 4.2.1 The material is assayed for boron to determine whether the boron content is as specified by the purchaser. 4.2.2 Determination of the isotopic content of the boron is made to establish whether the 10B concentration is in compliance with the purchaser's specifications. 4.2.3 Impurity content is determined to ensure that the maximum concentration limit of certain impurity elements is not exceeded. |
|||||||||||||||||||
1. Scope | |||||||||||||||||||
1.1 These test methods cover procedures for the chemical, mass spectrometric, and spectrochemical analysis of nuclear-grade aluminum oxide and aluminum oxide-boron carbide composite pellets to determine compliance with specifications. 1.2 The analytical procedures appear in the following order:
1.3 The values stated in SI units are to be regarded as the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
|||||||||||||||||||
2. Referenced Documents | |||||||||||||||||||
|
Poslední aktualizace: 03.11.2024 (Počet položek: 2 209 203)
© Copyright 2024 NORMSERVIS s.r.o.