Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide
Přeložit název
NORMA vydána dne 1.2.2019
Označení normy: ASTM C791-19
Poznámka: NEPLATNÁ
Datum vydání normy: 1.2.2019
Kód zboží: NS-939937
Počet stran: 28
Přibližná hmotnost: 84 g (0.19 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
analytical methods, boron carbide, chloride, combustion analysis, constant-current coulometry, constant-voltage coulometry, coulometry, DCArc OES, fluoride, free carbon, ICP OES, ICP MS, inductive furnace, infrared absorption, ion-selective electrode, isotopic composition, mannitoboric acid procedure, mass spectrometry, metallic impurities, pyrohydrolysis, soluble boron, TIMS, titrimetry, total boron, total carbon, water content, weight loss on drying,
Significance and Use | ||||||||||||||||||||||
4.1 Boron carbide is used as a control material in nuclear reactors. In order to be suitable for this purpose, the material must meet certain criteria for assay, isotopic composition, and impurity content. These methods are designed to show whether or not a given material meets the specifications for these items as described in Specifications C750 and C751. 4.1.1 An assay is performed to determine whether the material has the specified boron and carbon content. 4.1.2 Determination of the isotopic content of the boron and the free carbon content is made to establish whether the content is in compliance with the purchaser’s specifications. 4.1.3 Impurity content is determined to ensure that the maximum concentration limit of certain impurities (chloride, fluoride, water, metallic impurities, soluble boron) is not exceeded. |
||||||||||||||||||||||
1. Scope | ||||||||||||||||||||||
1.1 These test methods cover procedures for the chemical, mass spectrometric, and spectrochemical analysis of nuclear-grade boron carbide powder and pellets to determine compliance with specifications. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 The analytical procedures appear in the following order:
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||
|
Poskytování aktuálních informací o legislativních předpisech vyhlášených ve Sbírce zákonů od roku 1945.
Aktualizace 2x v měsíci !
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 01.11.2024 (Počet položek: 2 208 817)
© Copyright 2024 NORMSERVIS s.r.o.